pectel T6
#1
Too many posts.. I need a life!!
Thread Starter
Join Date: Jul 2004
Location: norway
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
pectel T6
looking for a used Pectel T6 complete with loom for a cossie.
could anybody help me there? tony,tim
no links to andybike,eddypain etc etc please
cheers
could anybody help me there? tony,tim
no links to andybike,eddypain etc etc please
cheers
#4
Too many posts.. I need a life!!
Thread Starter
Join Date: Jul 2004
Location: norway
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
ok. i found 2 used T6 ecu`s on a rallysite but they are 950£ each and havent been to service since 2000.
and they are also ford developer of some sort.i know i costs around 250£
to get a software change and another 150£ for the check up(diagnose)
and then i need a wiring loom
maybe i should go autronic instead
and they are also ford developer of some sort.i know i costs around 250£
to get a software change and another 150£ for the check up(diagnose)
and then i need a wiring loom
maybe i should go autronic instead
#5
Guest
Posts: n/a
dont buy from unkown sources !!!!!!!
problem is T6 need updates and theres some floating about that are broken. u need to call pectel with the serial and find out if they have had it in for repairs etc.
as i said, talk to mike rainbird !!!!! he got mine and his
for the loom contact ryan off the board here or again SCS (harvey gibbs), mine is from harvey.
michael
p.s. i would not touch autronic
problem is T6 need updates and theres some floating about that are broken. u need to call pectel with the serial and find out if they have had it in for repairs etc.
as i said, talk to mike rainbird !!!!! he got mine and his
for the loom contact ryan off the board here or again SCS (harvey gibbs), mine is from harvey.
michael
p.s. i would not touch autronic
Trending Topics
#10
Too many posts.. I need a life!!
Thread Starter
Join Date: Jul 2004
Location: norway
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by martin-reyland
I have a spare T6 2000 (same spec as mine) but it would be £1400 if I were to sell..
maybe its more cost effective to buy a sq6 and loom straight from pectel.
i know pectel will be servising the T6 for many years but its a lot of money for a secondhand unit
#13
1st to 200 without NOS
iTrader: (2)
Originally Posted by capri-rs
i know pectel will be servising the T6 for many years but its a lot of money for a secondhand unit
#14
BANNED
BANNED
iTrader: (1)
Join Date: Jul 2003
Location: Wiltshire
Posts: 12,483
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GARETH T
Originally Posted by Flux Capacitor
Do you actually need a T6 ????
I agree but not everyone can afford one nor do they need all the features.
#17
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by capri-rs
ok. i found 2 used T6 ecu`s on a rallysite but they are 950£ each and havent been to service since 2000.
and they are also ford developer of some sort.i know i costs around 250£
to get a software change and another 150£ for the check up(diagnose)
and then i need a wiring loom
maybe i should go autronic instead
and they are also ford developer of some sort.i know i costs around 250£
to get a software change and another 150£ for the check up(diagnose)
and then i need a wiring loom
maybe i should go autronic instead
#22
10K+ Poster!!
iTrader: (2)
Originally Posted by martin-reyland
Originally Posted by markk
T6 has its place, but its not good enough formy new car as it doesnt have enough features, its now obsolete, so if your spending that much money and need that many features buy new.
#23
1st to 200 without NOS
iTrader: (2)
Originally Posted by markk
Originally Posted by martin-reyland
Originally Posted by markk
T6 has its place, but its not good enough formy new car as it doesnt have enough features, its now obsolete, so if your spending that much money and need that many features buy new.
#26
Too many posts.. I need a life!!
Thread Starter
Join Date: Jul 2004
Location: norway
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ryan
get t2. only very few need t6 because of its unique features
have been looking at the autronic SM4 but dont think it will be as good as any pectel unit.
that why i have started looking for a used T6 but if it works out to be a lot of money then i will buy the sq6 from pectel.
#27
1st to 200 without NOS
iTrader: (2)
Originally Posted by capri-rs
Originally Posted by Ryan
get t2. only very few need t6 because of its unique features
have been looking at the autronic SM4 but dont think it will be as good as any pectel unit.
that why i have started looking for a used T6 but if it works out to be a lot of money then i will buy the sq6 from pectel.
#28
Too many posts.. I need a life!!
Thread Starter
Join Date: Jul 2004
Location: norway
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by martin-reyland
Originally Posted by capri-rs
Originally Posted by Ryan
get t2. only very few need t6 because of its unique features
have been looking at the autronic SM4 but dont think it will be as good as any pectel unit.
that why i have started looking for a used T6 but if it works out to be a lot of money then i will buy the sq6 from pectel.
but i see your point. would still need the loom even if i get a T6 for 1400£
#29
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by martin-reyland
Originally Posted by capri-rs
Originally Posted by Ryan
get t2. only very few need t6 because of its unique features
have been looking at the autronic SM4 but dont think it will be as good as any pectel unit.
that why i have started looking for a used T6 but if it works out to be a lot of money then i will buy the sq6 from pectel.
Who makes your looms for that price? I need one for my new ECU.
#30
1st to 200 without NOS
iTrader: (2)
Originally Posted by DazC
Originally Posted by martin-reyland
Originally Posted by capri-rs
Originally Posted by Ryan
get t2. only very few need t6 because of its unique features
have been looking at the autronic SM4 but dont think it will be as good as any pectel unit.
that why i have started looking for a used T6 but if it works out to be a lot of money then i will buy the sq6 from pectel.
Who makes your looms for that price? I need one for my new ECU.
#31
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by martin-reyland
Originally Posted by DazC
Originally Posted by martin-reyland
Originally Posted by capri-rs
Originally Posted by Ryan
get t2. only very few need t6 because of its unique features
have been looking at the autronic SM4 but dont think it will be as good as any pectel unit.
that why i have started looking for a used T6 but if it works out to be a lot of money then i will buy the sq6 from pectel.
Who makes your looms for that price? I need one for my new ECU.
#34
Too many posts.. I need a life!!
Thread Starter
Join Date: Jul 2004
Location: norway
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
correct T6m
from our faihtfull supllier of 909 parts
ATM
confirmed by pectel it is on pectel external
just have to hook it up and see if it works
from our faihtfull supllier of 909 parts
ATM
confirmed by pectel it is on pectel external
just have to hook it up and see if it works
#38
.......................
iTrader: (2)
Join Date: Aug 2005
Posts: 1,848
Likes: 0
Received 0 Likes
on
0 Posts
Got my T6 2000 brand new in the states. External developer, still sealed, never used. It was running a later hardware version than the base map I had but Pectel transposed the Map onto the later version for me.
All done and delivered for a touch under £750 notes.
All done and delivered for a touch under £750 notes.