changing a clutch on a KA
#1
ELASTIC BAND
Thread Starter
changing a clutch on a KA
anyone know of an online guide or done it?
shall be getting the spanners out tomorrow
and myka.org was a good forum for help, but aint worked for weeks anyone know anyother ka forums?
shall be getting the spanners out tomorrow
and myka.org was a good forum for help, but aint worked for weeks anyone know anyother ka forums?
#2
3dr Cosworth owner
I helped my mate do one the other week on a Y reg ka. I know for a fact there are 3 different cluthces as some are cable and some are hydraulic, It was a pig to get the box off and out the way to make room to work, be prepared and patient thats all i can say, they are starightforward enough to do really if you have any mechanical skill. Just make sure you have something to centre the cluth, Either a clutch alignment tool or some people use a Big extencion bar , Ive even seen bits of wood used, Eg Brush handle etc
#3
ELASTIC BAND
Thread Starter
Originally Posted by Series1Guy
Just make sure you have something to centre the cluth, Either a clutch alignment tool or some people use a Big extencion bar , Ive even seen bits of wood used, Eg Brush handle etc
got bits of wood, so ill be ok then
#5
I've found that life I needed.. It's HERE!!
Join Date: Feb 2006
Location: wakefield
Posts: 1,007
Likes: 0
Received 0 Likes
on
0 Posts
they are all hydro clutch, also they are prone to eating the cltuch slave cylinder which is a one peice unit with the relece bearing so make sure you get one of those, apart from that i dont think they are that hard but ive never done another car so couldnt really tell you! good luck!
Thread
Thread Starter
Forum
Replies
Last Post