MADAde Dyno Figures obtained today
#82
20K+ Super Poster.
iTrader: (1)
Originally Posted by cossiedave
lets hope this engine last longer than the others need to prove the power now as for one of your other enines was ment to be over 500bhp and did,nt even make 400bhp all a load of bollocks no prove it
Dave, don't you like MA Developments work or something??
#85
20K+ Super Poster.
iTrader: (1)
Originally Posted by cossiedave
not really they only use norris,s dyno and a lot of people on here know the fig,s are fixed thats why he wont use any one else,s but they all pay him up so they must beleave it
I mean Kev T27 his Evo is a very quick Time attack car, Rods Saph obviously etc etc...
#87
Advanced PassionFord User
iTrader: (1)
Join Date: Dec 2004
Location: Bristol
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cossiedave
not really they only use norris,s dyno and a lot of people on here know the fig,s are fixed thats why he wont use any one else,s but they all pay him up so they must beleave it
I've also heard people claim to hit the rev limiter in fifth on the motorway on their way back from the RS club meeting, probably the coil breaking down at 6000 rpm
Watch this space all you disbelievers (and sad cunts, you know who you are )
#88
Did Someone Mention TUV
iTrader: (1)
Originally Posted by cossiedave
lets hope this engine last longer than the others need to prove the power now as for one of your other enines was ment to be over 500bhp and did,nt even make 400bhp all a load of bollocks no prove it
#89
Advanced PassionFord User
iTrader: (1)
Join Date: Dec 2004
Location: Bristol
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cossiedave
lets hope this engine last longer than the others need to prove the power now as for one of your other enines was ment to be over 500bhp and did,nt even make 400bhp all a load of bollocks no prove it
#90
Did Someone Mention TUV
iTrader: (1)
Originally Posted by MAD Ade
Originally Posted by cossiedave
lets hope this engine last longer than the others need to prove the power now as for one of your other enines was ment to be over 500bhp and did,nt even make 400bhp all a load of bollocks no prove it
#91
Originally Posted by MAD Ade
Originally Posted by cossiedave
lets hope this engine last longer than the others need to prove the power now as for one of your other enines was ment to be over 500bhp and did,nt even make 400bhp all a load of bollocks no prove it
#92
PassionFord Post Whore!!
Originally Posted by MAD Ade
Originally Posted by Fiecos Dan
Well Done Ade and Mark, another 200mph MAD car on its way.
Was the mani and ex wastegate the only changes?
what bhp increase where seen for each?
Was the mani and ex wastegate the only changes?
what bhp increase where seen for each?
Hi Dan,
changes from last year are only three things: Primary Designs inconel manifold to Marks design, Tial external waste gate, Nikasil liners on my old block.
Hows your Fiescos doing?
Will be looking at end of month till it back on the road.
Engine was build, but then i found the crank to be ground incorrect, and the strokes were all different, and havent had the time since,
But gonna get back on it in a week or 2, and Get it running.
Should be running 30bhp more power, cos upto now i've not sorted certain issue's. (aiming for a timed 180+, with the 10's)
#93
Advanced PassionFord User
iTrader: (1)
Join Date: Dec 2004
Location: Bristol
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Fiecos Dan
Originally Posted by MAD Ade
Originally Posted by Fiecos Dan
Well Done Ade and Mark, another 200mph MAD car on its way.
Was the mani and ex wastegate the only changes?
what bhp increase where seen for each?
Was the mani and ex wastegate the only changes?
what bhp increase where seen for each?
Hi Dan,
changes from last year are only three things: Primary Designs inconel manifold to Marks design, Tial external waste gate, Nikasil liners on my old block.
Hows your Fiescos doing?
Will be looking at end of month till it back on the road.
Engine was build, but then i found the crank to be ground incorrect, and the strokes were all different, and havent had the time since,
But gonna get back on it in a week or 2, and Get it running.
Should be running 30bhp more power, cos upto now i've not sorted certain issue's. (aiming for a timed 180+, with the 10's)
#94
PassionFord Post Whore!!
Originally Posted by Cosworth Bassie
Originally Posted by Mark Shead
Originally Posted by rapidcossie
One other question...
What revs is it on 2.5 bar?
What revs is it on 2.5 bar?
Mark
AWESOME result!
It has a .82 ar exhaust housing, The manifold is a split pulse but we could not get the divided housing we wanted for the 35.
Mark
What kind of A/R has it on the turbinehousing?
Regards,
Bas
#95
Advanced PassionFord User
Join Date: Jul 2004
Location: Berks
Posts: 2,003
Likes: 0
Received 0 Likes
on
0 Posts
Surley at this level of tuning / engineering the tuners should be cut some slack, its not like its a known quantity when your push the boundaries of engine tuning. Their not trying to get 285 BHP out of a standard engine for Pete's sake.
What these tuners do is push the limits & sometimes things go wrong but thats no reflection on them. They are building what someone has asked them to with the experience they have. I'm sure Mark & other tuners would love to just build 400 BHP engines most of the time as its a know quantity, if a bit boring for them.
People need to grow up and realise this is great news for what is an old Pinto engine not some F1 race engine.
What these tuners do is push the limits & sometimes things go wrong but thats no reflection on them. They are building what someone has asked them to with the experience they have. I'm sure Mark & other tuners would love to just build 400 BHP engines most of the time as its a know quantity, if a bit boring for them.
People need to grow up and realise this is great news for what is an old Pinto engine not some F1 race engine.
#100
Advanced PassionFord User
iTrader: (1)
Originally Posted by CossieRich
Originally Posted by MAD Ade
Originally Posted by cossiedave
lets hope this engine last longer than the others need to prove the power now as for one of your other enines was ment to be over 500bhp and did,nt even make 400bhp all a load of bollocks no prove it
#101
Originally Posted by MAD Ade
Originally Posted by cossiedave
lets hope this engine last longer than the others need to prove the power now as for one of your other enines was ment to be over 500bhp and did,nt even make 400bhp all a load of bollocks no prove it
well done mark/ade
#103
Advanced PassionFord User
iTrader: (1)
Join Date: Dec 2004
Location: Bristol
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cossiedave
ade my car did hit the limit in 5th what the fuck do you know you wernt in the car plus i built my engine my self not payed 15 to 20 grand but thats up to you i knew you would bite the only sad cunt or cunts are you
I've built my own engines also, Mark has never done anything except time the cams and tune/map it
#104
PassionFord Post Whore!!
Originally Posted by cossiedave
not really they only use norris,s dyno and a lot of people on here know the fig,s are fixed thats why he wont use any one else,s but they all pay him up so they must beleave it
Come up with a list of 5 SuperFlow dyno's and I will choose to run a engine there and at Norris, This list should be big players and not the bit part player you may have used , Now Mountune would be a good one but this would be a min requirement I would rather a even larger company as a min so find one,
The catch is if the engine does not make the same based on Superflow's requirement on the min diff between dyno cells I pay for the time on both dyno's if it makes the same you pay for it all based on you putting the cash upfront just like I would,
I guess you are not capable at meeting this chalenge so can you keep your uneducated views to yourself .
Mark
#105
Advanced PassionFord User
iTrader: (1)
Join Date: Dec 2004
Location: Bristol
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cossiedave
Originally Posted by CossieRich
Originally Posted by MAD Ade
Originally Posted by cossiedave
lets hope this engine last longer than the others need to prove the power now as for one of your other enines was ment to be over 500bhp and did,nt even make 400bhp all a load of bollocks no prove it
#107
cossiedave - you really should stay away from that keyboard if you cant handle it. It is making you look like a bit of a twat mate.
Are you seriously suggesting Mark pays Norris to fudge the dyno graphs to make his engines look more powerful than those developed by other tuners!? Thats also questioning the ethics of another respected (and proven!) tuner.
That is absolutely incredible. Im glad to see Mark has provided a case for you to prove yourself as something other than a small minded, bitter keyboard warrior.
So, lets hear your nomination for the independent dyno you want to use.
If you back out of this now you are going to look like the sad pathetic wanker you come across as.
Are you seriously suggesting Mark pays Norris to fudge the dyno graphs to make his engines look more powerful than those developed by other tuners!? Thats also questioning the ethics of another respected (and proven!) tuner.
That is absolutely incredible. Im glad to see Mark has provided a case for you to prove yourself as something other than a small minded, bitter keyboard warrior.
So, lets hear your nomination for the independent dyno you want to use.
If you back out of this now you are going to look like the sad pathetic wanker you come across as.
#108
Advanced PassionFord User
iTrader: (1)
Originally Posted by Mark Shead
Originally Posted by cossiedave
not really they only use norris,s dyno and a lot of people on here know the fig,s are fixed thats why he wont use any one else,s but they all pay him up so they must beleave it
Come up with a list of 5 SuperFlow dyno's and I will choose to run a engine there and at Norris, This list should be big players and not the bit part player you may have used , Now Mountune would be a good one but this would be a min requirement I would rather a even larger company as a min so find one,
The catch is if the engine does not make the same based on Superflow's requirement on the min diff between dyno cells I pay for the time on both dyno's if it makes the same you pay for it all based on you putting the cash upfront just like I would,
I guess you are not capable at meeting this chalenge so can you keep your uneducated views to yourself .
Mark
#111
Originally Posted by Mark Shead
Originally Posted by cossiedave
not really they only use norris,s dyno and a lot of people on here know the fig,s are fixed thats why he wont use any one else,s but they all pay him up so they must beleave it
Come up with a list of 5 SuperFlow dyno's and I will choose to run a engine there and at Norris, This list should be big players and not the bit part player you may have used , Now Mountune would be a good one but this would be a min requirement I would rather a even larger company as a min so find one,
The catch is if the engine does not make the same based on Superflow's requirement on the min diff between dyno cells I pay for the time on both dyno's if it makes the same you pay for it all based on you putting the cash upfront just like I would,
I guess you are not capable at meeting this chalenge so can you keep your uneducated views to yourself .
Mark
#113
10K+ Poster!!
Originally Posted by cossiedave
Originally Posted by ark1
Think everyone needs to calm down.
#117
PassionFord Post Whore!!
Dave what the fuck has somebody done to piss you of, Mark puts his money were his mouth is, his customers back up there claims, if they break parts they generally go again bigger and better,
If you dont like Ade then so be it but you are making yourself look like a 2 year old here, now take up Marks offer and prove him wrong because l know were my money will be going,
Mike
If you dont like Ade then so be it but you are making yourself look like a 2 year old here, now take up Marks offer and prove him wrong because l know were my money will be going,
Mike