cosworth gearbox what have you got fitted 2wd
#41
Happily retired
Originally Posted by abdr500
MadRod
i could adapt the box to fit but is the ratio the same or even close as its a fast road car and drivablity matters
i could adapt the box to fit but is the ratio the same or even close as its a fast road car and drivablity matters
Rod
#42
10K+ Poster!!
Originally Posted by dovboy
Originally Posted by escort700bhp
I RUN GETRAG JAG BOXES IN MY RS500s ,BOTH CLOSE ON 600BHP ,THESE ARE SYNCRO BOXES SO GOOD FOR THE ROAD 2.NEVER HAD A PROBLEM AND I GIVE THEM ABUSE !
THEY HAVE THE SAME CLUTCH SPLINES AS COSWORTH AND MATE UP TO THE FORD BELL VERY EASILY ETC
THEY HAVE THE SAME CLUTCH SPLINES AS COSWORTH AND MATE UP TO THE FORD BELL VERY EASILY ETC
i'm sure i could lay my hands on a box but what other parts would i need?
#44
PassionFord Post Troll
Has anyone thought of using a supra box?
The ones out of the squarer old shape turbo can be had for pennies and I'm sure i remember from some where that they are popular with the drag boys and are good for mega bhp (well the torque that you get with it).
Not sure what the output shaft is like?
The ones out of the squarer old shape turbo can be had for pennies and I'm sure i remember from some where that they are popular with the drag boys and are good for mega bhp (well the torque that you get with it).
Not sure what the output shaft is like?
#46
10K+ Poster!!
iTrader: (1)
Originally Posted by MadRod
Originally Posted by abdr500
MadRod
i could adapt the box to fit but is the ratio the same or even close as its a fast road car and drivablity matters
i could adapt the box to fit but is the ratio the same or even close as its a fast road car and drivablity matters
Rod
hi rod
the Tko 600 can be got cheaper than 1700
im defo going TKO 600 as it's rated at 600 ftl bs +20% ill never blow that thing for a start i would never see 600 ft lbs of torque anyway
it has also elctrionic speedo or mechanical speedo drive
but the one good thing with the TKO it's a normal "quite box " which is great for a normal road car and the 0.83 isn't a problem for me
it's worth the hastle of fitting it most defo it has the same spline pattern as My T56 which is 26....1/8th spline pattern
i know i have to do the belhousing /prop/gearbox mount /clutch
but thats the samw with most aftermarket boxes
marco
#47
Happily retired
Originally Posted by marco polo
hi rod
the Tko 600 can be got cheaper than 1700
im defo going TKO 600 as it's rated at 600 ftl bs +20% ill never blow that thing for a start i would never see 600 ft lbs of torque anyway
it has also elctrionic speedo or mechanical speedo drive
but the one good thing with the TKO it's a normal "quite box " which is great for a normal road car and the 0.83 isn't a problem for me
it's worth the hastle of fitting it most defo it has the same spline pattern as My T56 which is 26....1/8th spline pattern
i know i have to do the belhousing /prop/gearbox mount /clutch
but thats the samw with most aftermarket boxes
marco
the Tko 600 can be got cheaper than 1700
im defo going TKO 600 as it's rated at 600 ftl bs +20% ill never blow that thing for a start i would never see 600 ft lbs of torque anyway
it has also elctrionic speedo or mechanical speedo drive
but the one good thing with the TKO it's a normal "quite box " which is great for a normal road car and the 0.83 isn't a problem for me
it's worth the hastle of fitting it most defo it has the same spline pattern as My T56 which is 26....1/8th spline pattern
i know i have to do the belhousing /prop/gearbox mount /clutch
but thats the samw with most aftermarket boxes
marco
#49
10K+ Poster!!
Originally Posted by jb fletch
So what sorta cost would you be lookin at for the Getrag box ? ? ?
Gettin a box, adaptor plate, prop nose (i'm guessing), mount etc etc ? ? ?
Really interested in this
Jb
Gettin a box, adaptor plate, prop nose (i'm guessing), mount etc etc ? ? ?
Really interested in this
Jb
#50
10K+ Poster!!
Originally Posted by abdr500
TKO 600 how much for the box........ fitting isnt a problem
then its alot of work to fit too...?
#51
Too many posts.. I need a life!!
Join Date: May 2005
Location: motherwell
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jb fletch
So what sorta cost would you be lookin at for the Getrag box ? ? ?
Gettin a box, adaptor plate, prop nose (i'm guessing), mount etc etc ? ? ?
Really interested in this
Jb
Gettin a box, adaptor plate, prop nose (i'm guessing), mount etc etc ? ? ?
Really interested in this
Jb
i can supply box /adaptor plate and prop end for £350 , then you will need to modify the bellhousing abit , mainly drilling other holes in etc ,make up a spigot bearing adaptor as the jag box has a smaller dia spigot,get a prop made and extend the gear selector , thats about it ,
Thread
Thread Starter
Forum
Replies
Last Post
155lee
Ford RS Cosworth Parts for Sale
0
14-08-2015 11:21 AM
wheelwizardrefurbs
Technical help Q & A
10
04-08-2015 06:23 PM