extreme rollers....updated with pics
09-06-2007, 05:45 PM
#1
extreme rollers....updated with pics
went to extreme today with my mate,in witburn to check the place out and speak to the guys,and i was well impressed with their rolling road set up,the guys all seem sound aswell so we booked 4 hours on the rollers 2 weeks today to see what our cars are puting out
anyone else want to come?more than welcome
anyone else want to come?more than welcome
Trending Topics
09-06-2007, 08:26 PM
#8
most ive had out my car is 373bhp at wheels at ava,only mod since is dumping the induction and getting escort cosworth airbox
the 4 cars booked in but not all are going to be ready for sure is
SIERRA RS COSWORTH 3-DOOR 2WD..........hoping 420bhp at the fly
ESCORT COSWORTH 4X4...........hoping 400bhp at fly
SIERRA SAPHIRE 4X4.......hoping 330bhp at fly
LEXUS GS300 VERTEX(V6 TWIN TURBO)2WD.......hoping 500-550bhp at fly
only time will tell...lol
the 4 cars booked in but not all are going to be ready for sure is
SIERRA RS COSWORTH 3-DOOR 2WD..........hoping 420bhp at the fly
ESCORT COSWORTH 4X4...........hoping 400bhp at fly
SIERRA SAPHIRE 4X4.......hoping 330bhp at fly
LEXUS GS300 VERTEX(V6 TWIN TURBO)2WD.......hoping 500-550bhp at fly
only time will tell...lol
23-06-2007, 03:43 PM
#14
right went today only 2 of us made it
but top blokes and very good equipment,the dastek rolling road set up is very high tech
my car is still leaning out at 6500rpm(really needs mapped)
but at 25psi (will be 30) when sorted it made 456bhp at the fly
some people say they over read,but i honestly dont think so now,as my mates sti wr1 went on and made 330bhp and its factory standard except a small increase in boost,and they roll out the factory on 320bhp
and the car only has 12k on it
defo reccomend them,guys know what they are talking about,evo,scooby specialist i think but their r/road is the best ive ever seen
it shows everything thats going on,injector cycle ect ect,autronic equipment also
you get a full laminated print out with various tables and graphs for everything
Ł50 an hour defo recomend to anyone who is local
but top blokes and very good equipment,the dastek rolling road set up is very high tech
my car is still leaning out at 6500rpm(really needs mapped)
but at 25psi (will be 30) when sorted it made 456bhp at the fly
some people say they over read,but i honestly dont think so now,as my mates sti wr1 went on and made 330bhp and its factory standard except a small increase in boost,and they roll out the factory on 320bhp
and the car only has 12k on it
defo reccomend them,guys know what they are talking about,evo,scooby specialist i think but their r/road is the best ive ever seen
it shows everything thats going on,injector cycle ect ect,autronic equipment also
you get a full laminated print out with various tables and graphs for everything
Ł50 an hour defo recomend to anyone who is local
23-06-2007, 04:19 PM
#21
Originally Posted by Lambchop
if the rollers are that great why are there people sitting in the boot? 
Ł150,000 it cost to put the rolling road bay together
23-06-2007, 04:23 PM
#24
Originally Posted by NEIL A
Good results Col
If your talking about getting your car live mapped and the launch control and anti lag fitted you would of been cheaper going for the colins ecu.
If your talking about getting your car live mapped and the launch control and anti lag fitted you would of been cheaper going for the colins ecu.
concentrating on suspension and brakes just now
24-06-2007, 11:30 AM
#28
Advanced PassionFord User
good results
i found the same when i was up, the guys do seem to know what they're talking about.
one look at there rollers in that bay shows where the Ł150,000 went, very impressive.
i found the same when i was up, the guys do seem to know what they're talking about.
one look at there rollers in that bay shows where the Ł150,000 went, very impressive.
24-06-2007, 01:17 PM
#32
think so for first run
they do 3 runs,im not completly sure about what is says on 2nd run there as i did see 456@fly,and it says 454@fly on one of the runs there
i think they might take an average of the 3
but as everyone says you loose 40-50 bhp as a rule on 2wd,ive also been told that the more bhp you have the more you will loose through the wheels
when my car made 373bhp @wheels on ava rollers it was running 30 psi
as said 25psi yesterday+its got alot to do with the act`s,on the day+the fans they have i suppose
they do 3 runs,im not completly sure about what is says on 2nd run there as i did see 456@fly,and it says 454@fly on one of the runs there
i think they might take an average of the 3
but as everyone says you loose 40-50 bhp as a rule on 2wd,ive also been told that the more bhp you have the more you will loose through the wheels
when my car made 373bhp @wheels on ava rollers it was running 30 psi
as said 25psi yesterday+its got alot to do with the act`s,on the day+the fans they have i suppose
24-06-2007, 02:00 PM
#36
10K+ Poster!!
good results Col but very hard to beileve the car looses 100 bhp from fly to wheels.
Judging by your power there and @ AVA and comparing it with mine, it looks like it would made 580 bhp at the fly if i went to those rollers.
Pretty unbelieveable tho
Judging by your power there and @ AVA and comparing it with mine, it looks like it would made 580 bhp at the fly if i went to those rollers.
Pretty unbelieveable tho
24-06-2007, 03:44 PM
#40
Originally Posted by col cos1
know what we need to do is hire two normal run of the mill motors like new focus`s and get them on the rollers of a few
as who really knows which tuners are bang on and which arent
as who really knows which tuners are bang on and which arent