what tyres for 8x17s on a 3 door(updated)
#47
10K+ Poster!!
Originally Posted by marco polo
Originally Posted by rapidcossie
Originally Posted by Alps Pacino
rapidcossie
I knew they were a % of the width, fuck it i'll go 215 40 front and 235 35 rear and if they are wank i'll be on my way to scottyland to have stern words ya ken laddy
I knew they were a % of the width, fuck it i'll go 215 40 front and 235 35 rear and if they are wank i'll be on my way to scottyland to have stern words ya ken laddy
they will be sound....gor for Goodyear F1's too
seconds thoughts I have a saf so why listen to me?
saffs have better clearance than a 3dr ,
the kit stops alot of it , alot of 3dr owners wont cut /trim the kit
marco
air hacksaw will do the trick
#50
PassionFord Post Whore!!
Thread Starter
I tried to get a set of 235 35 17's today and they dont seem to make them or at least the tyre shop and mytyres dont do them.
Any ides before i buy the 235 40's
Any ides before i buy the 235 40's
#55
PassionFord Post Whore!!
Thread Starter
Originally Posted by Nash
You should be able to get F1's and T1-R's in 235/40/17 from any good tyres company. I run 235/40/17 T1-R's on then back of my saph, imo its the one of the best mods i have done to it gave me so much more grip and felt more stable aswell.
I'll just get a 235 40 and take it from there, if the trim need cuting then so be it
#56
358bhp
Join Date: May 2003
Location: watford, hertfordshire
Posts: 1,382
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by righthooker
i have ,215 on my 8*17 et 30 they catch on the near side front
#59
PassionFord Post Whore!!
Thread Starter
BROM@ZOO
The offset on mine?????????????????
The problem is i need not to catch like a bastard so they will need to sit in a little to prevent this. I like the look of them sitting out but its just not practical on a road car imo
The offset on mine?????????????????
The problem is i need not to catch like a bastard so they will need to sit in a little to prevent this. I like the look of them sitting out but its just not practical on a road car imo
#60
Originally Posted by Alps Pacino
BROM@ZOO
The offset on mine?????????????????
The problem is i need not to catch like a bastard so they will need to sit in a little to prevent this. I like the look of them sitting out but its just not practical on a road car imo
The offset on mine?????????????????
The problem is i need not to catch like a bastard so they will need to sit in a little to prevent this. I like the look of them sitting out but its just not practical on a road car imo
#62
Mulechild
iTrader: (3)
Join Date: Feb 2006
Location: North Wales
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
i'm having the same problems.. my rears are 8x17 et15, but the 215/35s on them atm look to small for them, and dont look tall enough to me. the kit was cut when i bought it so thats not an issue, any ideas?
Thread
Thread Starter
Forum
Replies
Last Post
Adam Graham
Restorations, Rebuilds & Projects.
7
06-09-2015 06:04 AM
3dr cossie
Alloy wheels and ICE for sale
1
02-09-2015 08:58 PM