Alps Pacino

where have people put there amal valve after fitting a 500 cooler. I have heard of people putting them on tHe inner wing near the air filter but i dont realy want to cut and extend the wires. Any ideas welcome cheers

gurnE

Make a little bracket that bolts to the slam panel.

There are two holes there already.

Thinking about it I think I saw a post where Lee @ fusion fabrications had made one

Alps Pacino

ye just been looking there i cant see the 2 holes on the slam panel but am thinking of using the fixings for the cambelt cover

Toad_RS

on fan cowling ?

Spiky

iTrader: (1)

i cable tied mine to slam panel

Jim Galbally

cable ties :P

lamb chops

Speak to Lee at Fusion, he made me a braket that bolts on the slam pannel for about 15 quid

boost mad

iTrader: (8)

i put mine near air filter. i thought about the cam cover fixings but i thought it would e a bit close ( if not touching ) the bonnet

CraigN

mines under the air filter too there are holes in the wheel arch panel just screwed it down

Smit

iTrader: (5)

made a little bracket off the front panel