Is a 7.4.1 comp to low to run a T34.63?
#41
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Bosch-Man
Originally Posted by chip-3door
Originally Posted by Bosch-Man
Hi Pete yes....the engine was made for 600bhp so basically its a case of just putting bigger injectors and turbo on it and remap of course.
Its a solid 400bhp with the T34.63 and is setup to perfection and very nice....you wouldnt be dissapointed,you could go bigger turbo but it depends what you want...in my EXPERIANCE it feels nice![Top](https://passionford.com/forum/images/smilies/smile011.gif)
Its a solid 400bhp with the T34.63 and is setup to perfection and very nice....you wouldnt be dissapointed,you could go bigger turbo but it depends what you want...in my EXPERIANCE it feels nice
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
If you had EXPERIENCE of both back to back you would realise that
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
It will work, but its far from ideal.
Excuse me???
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![007](https://passionford.com/forum/images/smilies/bond.gif)
![007](https://passionford.com/forum/images/smilies/bond.gif)
![Raz](https://passionford.com/forum/images/smilies/tongue.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#42
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by peteh
Originally Posted by Mike Rainbird
You don't need them with standard springs...
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
#43
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by chip-3door
Originally Posted by Bosch-Man
Originally Posted by chip-3door
Originally Posted by Bosch-Man
Hi Pete yes....the engine was made for 600bhp so basically its a case of just putting bigger injectors and turbo on it and remap of course.
Its a solid 400bhp with the T34.63 and is setup to perfection and very nice....you wouldnt be dissapointed,you could go bigger turbo but it depends what you want...in my EXPERIANCE it feels nice![Top](https://passionford.com/forum/images/smilies/smile011.gif)
Its a solid 400bhp with the T34.63 and is setup to perfection and very nice....you wouldnt be dissapointed,you could go bigger turbo but it depends what you want...in my EXPERIANCE it feels nice
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
If you had EXPERIENCE of both back to back you would realise that
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
It will work, but its far from ideal.
Excuse me???
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![007](https://passionford.com/forum/images/smilies/bond.gif)
![007](https://passionford.com/forum/images/smilies/bond.gif)
![Raz](https://passionford.com/forum/images/smilies/tongue.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#44
![Default](https://passionford.com/forum/images/icons/icon1.gif)
You said its running the same map as your std comp t34.48
make your mind up, i never mentioned live maps at all.
The only way your own comparison would make any sense if everything about the engines was the same (head and cams in particular) other than the CR and then both were on a map running the same sort of AFR and same sort of number of degrees to Det.
Thats my whole point, you think you have relevant experience of it but you dont.
make your mind up, i never mentioned live maps at all.
The only way your own comparison would make any sense if everything about the engines was the same (head and cams in particular) other than the CR and then both were on a map running the same sort of AFR and same sort of number of degrees to Det.
Thats my whole point, you think you have relevant experience of it but you dont.
![loser](https://passionford.com/forum/images/smilies/loser.gif)
#46
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by chip-3door
You said its running the same map as your std comp t34.48
make your mind up, i never mentioned live maps at all.
The only way your own comparison would make any sense if everything about the engines was the same (head and cams in particular) other than the CR and then both were on a map running the same sort of AFR and same sort of number of degrees to Det.
Thats my whole point, you think you have relevant experience of it but you dont.
![loser](https://passionford.com/forum/images/smilies/loser.gif)
make your mind up, i never mentioned live maps at all.
The only way your own comparison would make any sense if everything about the engines was the same (head and cams in particular) other than the CR and then both were on a map running the same sort of AFR and same sort of number of degrees to Det.
Thats my whole point, you think you have relevant experience of it but you dont.
![loser](https://passionford.com/forum/images/smilies/loser.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![007](https://passionford.com/forum/images/smilies/bond.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
#47
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Bosch-Man
Originally Posted by chip-3door
You said its running the same map as your std comp t34.48
make your mind up, i never mentioned live maps at all.
The only way your own comparison would make any sense if everything about the engines was the same (head and cams in particular) other than the CR and then both were on a map running the same sort of AFR and same sort of number of degrees to Det.
Thats my whole point, you think you have relevant experience of it but you dont.
![loser](https://passionford.com/forum/images/smilies/loser.gif)
make your mind up, i never mentioned live maps at all.
The only way your own comparison would make any sense if everything about the engines was the same (head and cams in particular) other than the CR and then both were on a map running the same sort of AFR and same sort of number of degrees to Det.
Thats my whole point, you think you have relevant experience of it but you dont.
![loser](https://passionford.com/forum/images/smilies/loser.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![007](https://passionford.com/forum/images/smilies/bond.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
I dont even know the car you are talking about or who built it, so i wouldnt have a clue what map was on it other than what you just said it was the same as whatever other car you were on about that had a std comp ahmed map, if you didnt word it very well thats your problem.
Anyway, all thats largely irrelevant TBH, providing they both have a map thats equivalent then thats cool and was what i was saying in the first place, but the KEY thing is that you are comparing two engines with completely different cam choices and then trying to draw meaningful conclusions from it as if the CR is the only difference.
If you had two engines where it was only the CR that was different (and both with an equivalent map) then EVEN YOU would feel the difference in pull on the higher CR one when off boost and when at the top end of the rev range phil
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
#49
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Bosch-Man
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#53
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Bosch-Man
..and PLEASE stop bleating to Rainbird...he told me to stop following you around...yet its quite clear its the other way round
![007](https://passionford.com/forum/images/smilies/bond.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![007](https://passionford.com/forum/images/smilies/bond.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
you smoking crack on your day off phil?
Or just DESPERATE to avoid having to make a comment about the fact the two engines you are comparing have different cams completely and so everything you are saying trying to imply the CR makes NO difference to the driveability is a lie?
![loser](https://passionford.com/forum/images/smilies/loser.gif)
#54
![Default](https://passionford.com/forum/images/icons/icon1.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
What are you on about comp ratio now for?????
..i have NO idea what you are on about due to the fact you are taking wild pot shots to get me to rise....
Mate the net is a way to relax..loosen up it aint this serious Pal
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#55
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Bosch-Man
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
What are you on about comp ratio now for?????
![007](https://passionford.com/forum/images/smilies/bond.gif)
Originally Posted by Bosch-Man
..i have NO idea
![loser](https://passionford.com/forum/images/smilies/loser.gif)
Originally Posted by Bosch-Man
Mate the net is a way to relax..loosen up it aint this serious Pal ![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#57
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Mike can you clean this thread up please as its well documentated that Chip is trying in vain to get me to call him a fat cunt to get me a ban from a site he acts like he owns..which i will NOT do.
To clarify for Pete
7.4/1 with t34 .63 is fine.....as i am running that spec now and have no issues,thats the answer to your question.
Chip has then turned it into a more complex post than it warrants to discredit me as per usual..but i dont care..cause i have the actual cars thus all info comes from driving various specs
To clarify for Pete
7.4/1 with t34 .63 is fine.....as i am running that spec now and have no issues,thats the answer to your question.
Chip has then turned it into a more complex post than it warrants to discredit me as per usual..but i dont care..cause i have the actual cars thus all info comes from driving various specs
![Content](https://passionford.com/forum/images/smilies/content.gif)
#58
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Bosch-Man
To clarify for Pete
7.4/1 with t34 .63 is fine.....as i am running that spec now and have no issues,thats the answer to your question.
7.4/1 with t34 .63 is fine.....as i am running that spec now and have no issues,thats the answer to your question.
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
#60
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Bosch-Man
...just to clarify,Chip is yet again stating the bleeding obvious ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#63
PassionFord Post Whore!!
Thread Starter
iTrader: (3)
Join Date: Jul 2003
Location: Edinburgh
Posts: 6,150
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Danny B
pete 6.8:1 comp, ported head, T34 16psi boost 349bhp 114.8mph through the 1/4mile. nah low comp wont work. ![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![Pthbbbb](https://passionford.com/forum/images/smilies/smile045.gif)
![Pthbbbb](https://passionford.com/forum/images/smilies/smile045.gif)
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
#66
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Bosch-Man
...Mark wont tell me what cams they are ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
That always makes me laugh with tuners TBH.
If i bought that car i would take the cams out and measure them if the tuner wouldnt tell me what they were TBH as i think its a bit pants not knowing about your own engine, espeically if you intend to modify it further with a different turbo etc later on, and worryingly for the secretative tuners, because you have the timing they are set at too as tehy are currently installed you would even be able to tell stuff like lift on overlap etc.
Must be quite worrying for tuners the thought of the wrong person buying their engine secondhand at a later date and publishing the details (i wouldnt do that personally, would just measure them out of interest), altough the tuners on here, all move things on at such a pace they probably dont care if people know where they were several years ago, so less of an issue than to some of the other tuners out there who have been doing stuff the same for donkeys years as they do it now.
#69
I've found that life I needed.. It's HERE!!
Join Date: Aug 2003
Location: Northwest
Posts: 1,223
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by chip-3door
Originally Posted by Bosch-Man
...Mark wont tell me what cams they are ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
That always makes me laugh with tuners TBH.
If i bought that car i would take the cams out and measure them if the tuner wouldnt tell me what they were TBH as i think its a bit pants not knowing about your own engine, espeically if you intend to modify it further with a different turbo etc later on, and worryingly for the secretative tuners, because you have the timing they are set at too as tehy are currently installed you would even be able to tell stuff like lift on overlap etc.
Must be quite worrying for tuners the thought of the wrong person buying their engine secondhand at a later date and publishing the details (i wouldnt do that personally, would just measure them out of interest), altough the tuners on here, all move things on at such a pace they probably dont care if people know where they were several years ago, so less of an issue than to some of the other tuners out there who have been doing stuff the same for donkeys years as they do it now.
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#73
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Phil
You are proving why Mark wont tell you what cams are fitted to your engine. Best not say too much. There are comments on this thread that prove people would be shocked at the cams Mark fits to his engines.
You are proving why Mark wont tell you what cams are fitted to your engine. Best not say too much. There are comments on this thread that prove people would be shocked at the cams Mark fits to his engines.
#74
PassionFord Post Whore!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by chip-3door
Originally Posted by Bosch-Man
...Mark wont tell me what cams they are ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
That always makes me laugh with tuners TBH.
If i bought that car i would take the cams out and measure them if the tuner wouldnt tell me what they were TBH as i think its a bit pants not knowing about your own engine, espeically if you intend to modify it further with a different turbo etc later on, and worryingly for the secretative tuners, because you have the timing they are set at too as tehy are currently installed you would even be able to tell stuff like lift on overlap etc.
Must be quite worrying for tuners the thought of the wrong person buying their engine secondhand at a later date and publishing the details (i wouldnt do that personally, would just measure them out of interest), altough the tuners on here, all move things on at such a pace they probably dont care if people know where they were several years ago, so less of an issue than to some of the other tuners out there who have been doing stuff the same for donkeys years as they do it now.
![Pthbbbb](https://passionford.com/forum/images/smilies/smile045.gif)
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Mark
#80
PassionFord Post Whore!!
![](https://passionford.com/forum/images/pf_gold_member.png)
Join Date: May 2003
Location: Northants
Posts: 9,076
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
A/R - It is defined as the inlet cross-sectional area divided by the radius from the turbo centerline to the centroid of that area.
Easier to read this as it explains it so well:
http://www.turbobygarrett.com/turbob...o_tech102.html
Easier to read this as it explains it so well:
http://www.turbobygarrett.com/turbob...o_tech102.html