BIG WULL

iTrader: (5)

What lambda sensor is used with msd closed loop system? Can you use oe one and can you use an be after market one

cossie4i+

iTrader: (15)

I have one to sell that MSD supplied when i had there closed loop chip.Only done a max of 2000 miles and comes with the wires to the ECU. £35 + post if you want it or you can collect it at Central Day if your going.



Steve

Glenn_

iTrader: (1)

Arnt they easy to wire up.There are only 3 wires.

BIG WULL

iTrader: (5)

Is that a standard ford one? Can an after market lambda be used with msd system?
My car has the standard lambda but by changing the turbo there is nowhere to screw it into. I'm going to weld a boss into the downpipe for a sensor. Guess what i'm asking is, would the standard lambda or an after market one be best to use for closed loop system?

tabetha

Just make sure it is a decent make, I'm sure the MSD ones are the excellent BOSCH widebands, like shown above.
tabetha

BIG WULL

iTrader: (5)

Cossie4i, is that standard ford one? What is the thread size?

dakunia

iTrader: (1)

This on picture abowe look like Bosch sensor from MSD closed loop kit, it has M18x1,5 thread.
Std cossi sensor mounted on turbo housing is M12x1,25mm thread.
Weld on lambda boss on downpipe after turbo and then fit unit as above, or buy std Ford sensor - available through Stu @ MSD from memory.

regards
maciek