Mr C

iTrader: (2)

blimey, good going that. You think you can squeeze in some custom stuff at a sensible price? I have a few parts I want lighter than standard.
Good going Mr Worth.

Mr.worth

iTrader: (1)

Mr C, pm'ed ya

Sticky.

iTrader: (4)

Hope everything takes off for you mate. Good luck with the new adventure

Mr.worth

iTrader: (1)

Thanks mate,its one hell off a steep learning curve so will have to see how it goes

slowpoke

get some stuff made asap lol

matt

Mr.worth

iTrader: (1)

I hope all my customers are not like you pmsl

If it was me making the parts I would be working 24hrs might have to hold him a gunpoint to speed things up a bit

G-Junior

Looks pritty sweet. Rekon I'll proberly B interested in 1 once I've got a few other bits sorted and depending on price. Hope the testing works out.

lacey

the plate that i was on about is a plate of carbon fibre 1/2 inch thick with the port holes and the stud holes in it and it is mounted between the inlet manifold and the head and this reduces the heat in the inlet componants which in turn allows the inlet air temp to be cooler

RSCossieGaz

iTrader: (6)

do you have the site address for these think it was creative carbon

Mr.worth

iTrader: (1)

If you dont mind waiting,I know where you will be able to get all that alot cheaper soon mate

Tony Rs

iTrader: (9)

as soon as you have prices just let me know

RSCossieGaz

iTrader: (6)

slowpoke

any updates ????

slowpoke

again lol,

any updates ???

matt

Mr.worth

iTrader: (1)

,be patient and you will be rewarded in mucho carbon greatness ,cause all of the parts are new for moulds its taken a bit longer than i had hoped ,but im certian all will be worth it as soon as ive got something to show i will get pics up

TurboShed

Looks the business

As ever though, price is everything. However much I'd like a carbon rocker cover, I can't stop thinking what else I could spend Ł500 on. If it was half that price, then that'd be getting serious.

Each to his own, and his own pocket too

slowpoke

i take it this has been given up on now ???

matt

indycos

iTrader: (2)

what about an RS500 style splitter for the saff in carbon?

essex_jamie

any news

Mr.worth

iTrader: (1)

No way mate,not given up just did'nt realise how long it would take,,the two guys who are doing it have to work then make it all in their spare time and they just dont have enough time to do it all as fast as I could sell it,but the good news is there is moulds made ,at the moment we have,

rear window pillars
rear door quarters
no plate surround
dump valve plug
engine lifting eyes
fog light surrounds
large k&n trumpet
door handles
throttle bracket


and more in the process

just taking time thats all,im hoping to have a few bits ready for when I go lemans so should'nt be lon till theres some products ready.

keep yours eyes peeled for sideways solutions

essex_jamie

cool i want some carbon

cozzie4d

There's enough market for it, I think..
When you have some parts ready, please post up pics.

Would be interested in camcover, fog light covers and rear window pillars/thingies

Mr C

iTrader: (2)

Hi again, Im interested in buying your carbon fog light surrounds, hose bungs, lifting eyes etc Please PM or e-mail me when you get a price in mind for your products, would be looking at a quantity . Regards Mark C.

rstoughy

iTrader: (5)

Saff Rear spoiler M8?

slowpoke

how about the inside trims to the rear window trims ?

also the front door inside trims ie the trim that has the mirror adjustment switch in it ?

also the saph roof strips with the two slidy covers on them for a roof rack pmsl

and the window switches cover, dunno how you would do it but something that fits over this switch with the holes for the window switches and the rear window lock.

matt

JTECH James

iTrader: (13)

that trim for the mirror adjustment switch ,could be made to house a boost gauge that is the best place for them to go

essex_jamie

yeah im really interested in carbon bits
rear pillars
number plate surround
inside and outside rear window qtrs
fog light surround
turbo heat shield
door handles??
air filter heat shield
cam cover

Mr.worth

iTrader: (1)

Dont want much do ya

window switch thing will be piece of piss so i'll get onto that straight away

Other than that there is some light at the end of my tunnel...............................I got some bits back at last ,as soon as I have time I will get pics up,I have got,

dump valve plug
engine lifting eyes
alternator bracket(this is so light compared to standard)
battery holder

no set prices as yet as these are the first products i have and would like to obviously try them out first and get any changes made that I have to,im really tempted to do stuff that will make a big differance in weight to standard stuff,so anything cosmetic dosent really need to be 100%carbon as its only for looks and will be costly and not really what i'd call effective,so engine parts are going to be the way forward cam cover is next on the list,my fingers are well crossed for this to work

fiesta_xr2i

i hope you send to norway ??

PS : i have paypal

slowpoke

get the window switch bit and the other bits done

and get some pics up to wet out appetites lol

matt

Mr.worth

iTrader: (1)

Finally got some bits back to try on the cossie,they worked well all the way to leman,then i blew the diff anyway got some pics

dump valve plug

rear window quarters

battery holder

Sticky.

iTrader: (4)

They look mint

cozzie4d

Nice one

Keep the pics of the other parts coming, including prices

Mr.worth

iTrader: (1)

Prices will depend on how much carbon you want,full carbon aint cheap but for cosmetic stuff abit of glassfibre isnt gonna make them look any worse just not as light.

The alternator bracket weighs less than 2 grams in full carbon,battery holder is well under a gram compared to 4.3g standard

escort mk6

tastey

although im trying not to keep spending, whats the damage on a pair of sail pannels, which are just for cosmetics

Mr.worth

iTrader: (1)

?Thats a new one to me mate but if you mean window thingys hoping around the 50 mark

escort mk6

yeh the window bits, so many names lol. i could be very tempted at that price

slowpoke

How much for the battery clamp in f/glass and also in carbon ?

Matt

Fastmaul

How's the rocker cover coming along?

Mr.worth

iTrader: (1)

Still not sure on prices yet guys,this stuff is taking forever to get sorted ,still waiting for some special material for the cam cover from the us.i'll try and find out some more this week