**More Fiesta Mk3 Parts Prices UPDATED 23/11/11**
#1
PassionFord Regular
Thread Starter
Join Date: Oct 2006
Location: Heathrow
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
**More Fiesta Mk3 Parts Prices UPDATED 23/11/11**
Hi all,
I have added a few more parts.
Reconditioned Manual Fiesta Mk3 RS Steering Rack with new Tie Rod ends (both only done 500 miles) £20
Mint Condition Clear Front Indicator Covers £5
Brand New Intank Bosch 003 Uprated Fuel Pump painted in Hammerite Black Fitted by Groove Garage, never fitted and is good for engines producing high end power for 250+BHP, have receipt for £250 by Groove Garage £150
Silver Annodised Bee Sting Aerial £3
Replica M3 Mirrors with Side Indicators £10
STORM Single Wiper Kit £15
Silver and Blue Sparco Gearknob £5
Unused Silver Flambeater Fire Extinguisher £10
Black Boot Carpet in good condition £10
Water Header Tank £10
Chrome Strut Covers £12
Heavy Duty Halfords Battery 540amps HBO97
Rocker Cover Rubber Gasket in good condition £5
White Powder Coated Water Resoirvoir (connects to the head next to coil pack) £10
I have many more parts and will add them later if you require other parts please let me know.
I HAVE MORE PARTS AVALIABLE THAT ARE NOT LISTED IF YOU REQUIRE ANYTHING IN PARTICULAR LET ME KNOW, I HAVE ADDED A FEW PICTURES BELOW OF SOME PARTS THAT YOU MIGHT REQUIRE
Thanks
I have added a few more parts.
Reconditioned Manual Fiesta Mk3 RS Steering Rack with new Tie Rod ends (both only done 500 miles) £20
Mint Condition Clear Front Indicator Covers £5
Brand New Intank Bosch 003 Uprated Fuel Pump painted in Hammerite Black Fitted by Groove Garage, never fitted and is good for engines producing high end power for 250+BHP, have receipt for £250 by Groove Garage £150
Silver Annodised Bee Sting Aerial £3
Replica M3 Mirrors with Side Indicators £10
STORM Single Wiper Kit £15
Silver and Blue Sparco Gearknob £5
Unused Silver Flambeater Fire Extinguisher £10
Black Boot Carpet in good condition £10
Water Header Tank £10
Chrome Strut Covers £12
Heavy Duty Halfords Battery 540amps HBO97
Rocker Cover Rubber Gasket in good condition £5
White Powder Coated Water Resoirvoir (connects to the head next to coil pack) £10
I have many more parts and will add them later if you require other parts please let me know.
I HAVE MORE PARTS AVALIABLE THAT ARE NOT LISTED IF YOU REQUIRE ANYTHING IN PARTICULAR LET ME KNOW, I HAVE ADDED A FEW PICTURES BELOW OF SOME PARTS THAT YOU MIGHT REQUIRE
Thanks
Last edited by BlueFiesta85; 23-11-2011 at 03:00 PM. Reason: new description added
#7
PassionFord Regular
Thread Starter
Join Date: Oct 2006
Location: Heathrow
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
ive never actually had the car on the rolling road to get results but when i had it tunned by ahmed at grove garage he said its around 250+ in power.
Trending Topics
#8
PassionFord Post Whore!!
iTrader: (3)
it would be if it had a stage3 t3 mate but power aint everything with an rst a good strong and punchy 220bhp on a stage2 t3 wont be far off a laggy stage3 anyway...
plus it sounds like a reliable set up but to be 250bhp it would need 23/25psi on that turbo....
you might find it easier like i did to sell in bits..
bottom end
head
management
turbo
and all the little bits
its just you normaly wont find someone to buy the lot so would be easier to break it... and you should get what your looking for mate
plus it sounds like a reliable set up but to be 250bhp it would need 23/25psi on that turbo....
you might find it easier like i did to sell in bits..
bottom end
head
management
turbo
and all the little bits
its just you normaly wont find someone to buy the lot so would be easier to break it... and you should get what your looking for mate
#10
PassionFord Regular
Thread Starter
Join Date: Oct 2006
Location: Heathrow
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
it would be if it had a stage3 t3 mate but power aint everything with an rst a good strong and punchy 220bhp on a stage2 t3 wont be far off a laggy stage3 anyway...
plus it sounds like a reliable set up but to be 250bhp it would need 23/25psi on that turbo....
you might find it easier like i did to sell in bits..
bottom end
head
management
turbo
and all the little bits
its just you normaly wont find someone to buy the lot so would be easier to break it... and you should get what your looking for mate
plus it sounds like a reliable set up but to be 250bhp it would need 23/25psi on that turbo....
you might find it easier like i did to sell in bits..
bottom end
head
management
turbo
and all the little bits
its just you normaly wont find someone to buy the lot so would be easier to break it... and you should get what your looking for mate
#11
PassionFord Regular
Thread Starter
Join Date: Oct 2006
Location: Heathrow
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
#16
PassionFord Regular
Thread Starter
Join Date: Oct 2006
Location: Heathrow
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
#19
PUG 306 GTI-6
iTrader: (16)
I see people are still the same clogging up peoples for sale threads with there opinions!!! if ahmed at grove garage said it was 250bhp then i would be more inclined to believe him m8 than the doubters that have posted on here!!! Anyway would the vibratechnic mounts fit a series 2 as not 100% certain if they are the same m8??
#25
PassionFord Regular
Thread Starter
Join Date: Oct 2006
Location: Heathrow
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
yes i will mate, just to let you know that the car has not been stripped yet as i am waiting for an engine crane so it will take upto 1-2 weeks before you get them mate.
#26
PassionFord Regular
Thread Starter
Join Date: Oct 2006
Location: Heathrow
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
#28
PassionFord Regular
Thread Starter
Join Date: Oct 2006
Location: Heathrow
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
thanks
#31
PassionFord Regular
Thread Starter
Join Date: Oct 2006
Location: Heathrow
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Hello mate they are chrome Auto Gauge gauges with the blue illuminating light heres a pic of how they look exactly:
http://elink.crazysales.com.au/ebayp...SEL-2_01_L.jpg
cheers
http://elink.crazysales.com.au/ebayp...SEL-2_01_L.jpg
cheers
#35
PassionFord Regular
Thread Starter
Join Date: Oct 2006
Location: Heathrow
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts