MarcusRSTurbo

ok mate well pm me on how you would like me to pay

Raj_FRST

can you pm me a price for the complete head, ap clutch, gotech (if its not sold), fuel lines and the alloy rad please. Can you include prices posted seperatly and all together if you can do a deal, if some of the parts are sold I appoligise, im in work and dont have time to read the whole thread.

Thanks mate

TurboBlower

NO PM Recieved :-{

S1-Tiz

iTrader: (1)

Sold mate sorry.

muz

Has the exhaust gone?

S1-Tiz

iTrader: (1)

still got the exhaust mate


Engine and front end all stripped down now so i'll be polishing the rad, intercooler and other ally parts up tomorrow and taking pictures, i'll upload pictures of everything this weekend.

stevie m

alrite mate,what kinda power was the engine running,and who was it built by?do u have receipts?interested if u still have it for sale,cheers

Northants Ford Fan

have you got the front anti roll bar set up if you have how much ?

muz

Whats your best price on the exhaust posted mate?

martinmilne

im intrested in the front brakes mate can you send me a pic ? and/or when are you avaliable for me to pick up ?

Tim

iTrader: (1)

have my bits been posted yet ?

B1G_RST

iTrader: (1)

bottom end still there mate not heard from you yet sean

mikemcc03

have you still got the suspension?

motormel

iTrader: (1)

hi,
i know your not selling the shell, but would you sell the boot + spoiler? not fussed about rear screen/rubber if necessary and any chance of a courier??
also second dibs on the exhaust please
cheers
mel

NC53

Can you send me a pic of the a pillar guages please. Which ones are they?

cheers

Neil
neilcarter53@hotmail.com

Tim

iTrader: (1)

Can you tell me where my stuff is? i left you a few pms with no answer is there a prob i know you were on line last night
Last Activity: Yesterday 10:14 PM
why am i not getting a reply ? i wouldnt mind but i payed you next day with cash and that was a week last saturday ?
tim

rst-s2

just about to post same thing! i been wating over a week now, again money was with u within 24hrs and pm not replied 2

S1-Tiz

iTrader: (1)

Tim your wideband has been posted mate. Sorry i thought i PM'd you about how ill i had been i could barely get out of bed let alone go and strip stuff off the car i am terribly sorry but you should have it very soon. Also dont forget couriers and post is considerably slower this time of year.

rst-2. What did you buy from me as ive had that much contact etc i dont remember you? And Tim is the ONLY cash payment i have received?


Note : just so EVERYBODY knows parts are now off the car and have either been posted or are being collected tomorrow and they will be with you ASAP see reason above for delay. Trust me im not here to rip anybody off or do anything wrong just here for my interest in fords and to sell parts off my S1 that im breaking.

Tim

iTrader: (1)

cheers for the info ill let you know when it arrives
tim

rst-s2

pm'd

Riggie

PM sent

S1-Tiz

iTrader: (1)

Right here is a load of pictures of parts.


Rear strut brace Ł25 posted


Quick rack, got receipt for over Ł80 new from burton power. Ł45 delivered


Braided injector lines - Ł35 delivered


smoked exhaust gas temp gauge, no probe but these can be brought seperate cost Ł80 new, Ł30 posted.


Level sensor dip stick for s1 oil level. mint condition Ł40 posted


Brand new rear light holder, comes with all little clips and bits - Ł15 posted



Polished cross over pipe with welded on 5th injector and dump valve boss, comes with the dumpvalve and blue silicone pipe. also comes with the 5th injector driver which i have a receipt for from motorsport developments. Ł100 posted


standard actuator - Ł10 posted



Chrome top mounts - Ł15 posted


Twin spal fan setup Ł50 posted


S1 gearbox, believed to be no good but seems fine so im selling as spares, good to get the LSD out for your non LSD box - Ł60 posted


turbo heat sheild in chrome - Ł30 delivered


Large front mount intercooler for S1 or S2 rs turbo alloy - Ł250 posted


Pro alloy oil seperator polished alloy Ł60 posted


Polished thermostat housing - Ł35 posted


Rad tec S1 and S2 large alloy radiator, comes with mounting brackets Ł240 posted



Stage 3 T3 turbo and manifold, done hardly any miles since rebuild, doesnt smoke, holds boost well etc, -31 acuator, capable of supplying around 28psi. 360 bearing, cosworth compressor wheel, back cut blades, larger compressor housing, ar38 turbine housing, led tin coated journal bearings. Got the receipts for the rebuild totalling Ł487 by turbo developments and engineering. Asking Ł350 posted for the setup will come with braided turbo feed line as well.




Dead flat removed from a complete and running car just decided to sell the head and block seperate. Comes with a newman PH4 turbo cam, solid lifter setup, head work, not sure if valves have been worked but definately had some port and polishing work done to it. Vernier pulley which is all setup and timed perfectly. White marks in chambers are just water droplets and nothing else only been removed 1 week. The car hasnt done many miles on this head. It made 225bhp on MFI and believed to make around 250-280 on the EFI so this head is capable of big power. Asking Ł300 delivered.


Front upper strut brace polished alloy - Ł30 posted


Polished alloy rocker cover - Ł70 posted will come with correct bolts


Pro alloy polished alloy header tank with correct level sensor for S1 etc. Ł110 posted


Block, fully balanced bottom end with ap racing clutch, forged accralite pistons, overbored 1mm(1640cc) pistons machined for 7.5:1 compression ratio. Shot peened rods, new bottom end bearings, new rings etc, not long been rebuild about 2000 ago? Got receipts for most if not all parts bought and work done, been at least Ł1500 of work done on this bottom end. Made 225bhp rolling road with the head and turbo above. Asking Ł550 delivered to your door(on a pallet) or Ł500 collected.


perfectly working stater motor and heat sheild - Ł30 posted


Blue powercoated adjustable anti roll bar setup Ł120 posted


s1 clocks with white dials and white LEDs Ł35 posted everything working



4 spoke wheel, rs centre cover, polished motorsport boss. Little tatty could do with tidying up etc. Ł50 posted


a piller gauge pod Ł25 posted



s1 ash tray, RS decal, chrome flap Ł30 posted



Delocked doors, mint, perfect paint etc with striped, complete with working electric motors, glass etc etc Ł40 each or Ł80 the pair obviously. COLLECTION from cambridgeshire only.



Bronze opening rear quaters with hinges etc and everything Ł40 COLLECTION ONLY


Mint windscreen and rubber(providing it doesnt break on removal) Ł50 collection only!



Full stainless scorpian exhaust system in very good condition, right through to the down pipe Ł120 posted to your door





Full set of s1 alloys including a spare with no tyre(not pictured) Some laquer damage on 1 wheel. All in very good condition over all though all with nearly new dunlop sp9000 tyres - Ł140 posted


Cosworth fuel pump Ł40 posted, receipt for Ł80 new.




Brand new in box head lights, only fitted to car then removed never seen the road - Ł50 posted.


pipercross foam air filter - Ł20 posted


Chrome bonnet prop Ł25 posted


Very good condition bonnet collection only Ł40


Mint rust free tailgate comes with spoiler(paint cracking), rear screen etc etc all in very good condition near perfect. Will come with keys for boot lock. Ł50 collection only.



Those are all i have pictures of so far, i realise some prices are different but these are the current prices etc, contact me either here of pm if you want anything.

motormel

iTrader: (1)

pm'd

gary scott

iTrader: (6)

PM'd

orion_crazy_carl

iTrader: (3)

wentg and collected my bits from this guy today,genuine good guy!!shame about the VW obsession

trucker_stuart

Can you tell me if the rear windscreen is a Triple X or Sekurit & has it been etched at all + are there any scratches on it ????

Cheers
Stu

muz

I'll take the twin pillar.

mark_24v_wiring

iTrader: (1)

PM'd mate

gus

iTrader: (1)

i will have the quick rack if you still have it

rsmark86

iTrader: (3)

hi would you take 6oo for head and bottom end

danny_boy699

iTrader: (5)

i take the filter mate

blueskies85

i know you have made your mind up to break it but may i say this.... what a shame

rst-s2

Has any one else not recivied there stuff from this tosser? dosent reply to pm for ages then says it sent and still nothing!

mark_24v_wiring

iTrader: (1)

Well thats just put me off buying a load of bits..................

Northants Ford Fan

I pm'd him about a few bits when he first put the post up and didnt get a response, so decided not to spend my money with him even though he had a few bits i wouldnt of minded.

stuart collins

iTrader: (7)

still waiting for my bits where are they why dont u answer your pms??????????????

Christian and Beccy

iTrader: (14)

Oh dear, doesn't sound good.

rst-s2

bloke a prick, if he wasent so far away i would go round and see the twa*, not alot of money but its the not the point! could return money with a sorry i could turn a blind eye to it but aint even heard from him!

B1G_RST

iTrader: (1)

i was going to send him 500 for his block glad i never now

Christian and Beccy

iTrader: (14)

The irony of how this whole thing came about. Didn't he get fleeced over the car in the first place and everyone on here showed him ALOT of support and this is how he repays it?