Escort breaking group a/wrc parts updated 12/7/09
#1
Escort breaking group a/wrc parts updated 12/7/09
I've decided to break my escort rally car lots of bits will be available.
FFD 6 speed sequential with handbrake release & flat shift gearstick, comes with the vertical handbrake with dual master cylinders, oil cooler remote reservoir center push hydraulic release bearing which is new ,clutch plates, the gear indicator, has done very little, £12000ovno
wrc exhaust manifold £800 posted
t35 roller bearing turbo with uprated bearings, 34mm restrictor msa lock wired £1100 posted
air to air injectors £250 posted
The fully trimmed rolling shell with the wrc type rear end will come basically complete minus engine and drive train, so it comes with the seats, bag tank 044 fuel pump all piping dual master cylinder bias peddle box ,branz laser 3 trip computer flocked dash bilstien jumbo shocks on rear spax on front ap racing 4 pot group a 315mm all round, light weight fiberglass bonnet wrc wings and bumper, proper wrc Kevlar rear wing £7500 for more info 07851005176.
SOLD
sold
4 off raceline RL7 group a 17" with wets £390 ono
compomotive 15" group a gravel wheels/ tyres £400
7.5" plated rear diff 3.9 ratio Sold
6.5" plated front 3.9 ratio in strengthened case £450
7,5" 4.4 ratio rear diff £500
loads of other bits that i will list over the next few days
FFD 6 speed sequential with handbrake release & flat shift gearstick, comes with the vertical handbrake with dual master cylinders, oil cooler remote reservoir center push hydraulic release bearing which is new ,clutch plates, the gear indicator, has done very little, £12000ovno
wrc exhaust manifold £800 posted
t35 roller bearing turbo with uprated bearings, 34mm restrictor msa lock wired £1100 posted
air to air injectors £250 posted
The fully trimmed rolling shell with the wrc type rear end will come basically complete minus engine and drive train, so it comes with the seats, bag tank 044 fuel pump all piping dual master cylinder bias peddle box ,branz laser 3 trip computer flocked dash bilstien jumbo shocks on rear spax on front ap racing 4 pot group a 315mm all round, light weight fiberglass bonnet wrc wings and bumper, proper wrc Kevlar rear wing £7500 for more info 07851005176.
SOLD
sold
4 off raceline RL7 group a 17" with wets £390 ono
compomotive 15" group a gravel wheels/ tyres £400
7.5" plated rear diff 3.9 ratio Sold
6.5" plated front 3.9 ratio in strengthened case £450
7,5" 4.4 ratio rear diff £500
loads of other bits that i will list over the next few days
Last edited by sfhsport; 12-07-2009 at 10:06 PM.
Trending Topics
#18
How much for FFD 6 speed sequential with handbrake release & flat shift gearstick and the cooler
mi mail is jon_golfo@hotmail.com
mi mail is jon_golfo@hotmail.com
#34
think i built this car originally,, about ten years ago most parts have changed but i'm sure its the same shell, used to have the ford logo on the side,,it had air jack brackets in the shell.
#35
yes i think it is the same car and its sold now,its gone back up to Scotland aswell!,
#36
KAD 6 pots 355mm discs
KAD 6 pot calipers which have brackets to fit standard cosworth 4x4 front hubs,i also had them made with thin walled stainless steel pistons for less heat transfer instead of alloy, come with 355mm discs 'wilwood' with the alloy bells to fit 'group a' wheel studs and a set of brand new ferodo ds3000 brake pads, these brakes were awesome on the rally car and were rather expensive! will only fit under 18" wheels and group a 17" £1100