Pro Alloy Racing Fuel Tank! Brand New!!! PT800!! Reduced!!!
#1
Pro Alloy Racing Fuel Tank! Brand New!!! PT800!! Reduced!!!
For sale I have a brand new pro alloy racing fuel tank. It is a pro tank - PT800.
The tank measures approx 200mm high x 340mm wide x 800mm long. The tank has a capacity of 56 liters.
It is foam filled, Fitted with an aero 400 flush, Rubber spill tray, breather and roll over valve, -8 return and -10 feed fittings.
It is also fitted with a build in swirl pot and sender unit to stop any fuel starvation. A standard or seperate fuel gauge can be wired up to read how much fuel is in the tank.
It also come with two stainless steel fixing mounts and two rubber starps, with nuts, bolts and washers for fixings.
This is a top of the range fuel tank and was custom made for my fiesta cosworth that I was building. I have now sold the fiesta and no longer require the fuel tank
The fuel tank cost me just short of 900 pounds and has only been removed from the box once for the pictures. It is still sat in its original box and wrapped up securly. Have a look on pro alloys website just to see how much these things cost for a very basic tank. My tank has all the basics, extras and includes V.A.T.
http://www.proalloy.co.uk/cgi-bin/si...79&id=proalloy
Now 550 pounds delivered
Thanks
The tank measures approx 200mm high x 340mm wide x 800mm long. The tank has a capacity of 56 liters.
It is foam filled, Fitted with an aero 400 flush, Rubber spill tray, breather and roll over valve, -8 return and -10 feed fittings.
It is also fitted with a build in swirl pot and sender unit to stop any fuel starvation. A standard or seperate fuel gauge can be wired up to read how much fuel is in the tank.
It also come with two stainless steel fixing mounts and two rubber starps, with nuts, bolts and washers for fixings.
This is a top of the range fuel tank and was custom made for my fiesta cosworth that I was building. I have now sold the fiesta and no longer require the fuel tank
The fuel tank cost me just short of 900 pounds and has only been removed from the box once for the pictures. It is still sat in its original box and wrapped up securly. Have a look on pro alloys website just to see how much these things cost for a very basic tank. My tank has all the basics, extras and includes V.A.T.
http://www.proalloy.co.uk/cgi-bin/si...79&id=proalloy
Now 550 pounds delivered
Thanks
#3
I have an Escort cosworth custom interior consisting of Cobra daytona front seats and standard rear all trimmed in red and black alcantara with door car inserts and center consol cover. The retrim alone cost Ł1100 so I would be looking for a straight swap, let me know if you are intrested and I'll sort out some photo's, the seat's are in imaculate condition.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
steerfromdarear
Restorations, Rebuilds & Projects.
28
29-01-2016 06:14 PM
ekjim
General Car Related Discussion.
6
17-08-2015 08:57 PM