*sold* Bucket seats on mk1/mk2 mondeo subframes
#1
Twistin me melon man
Thread Starter
Join Date: Jul 2004
Location: Cambs UK
Posts: 1,998
Likes: 0
Received 0 Likes
on
0 Posts
*sold* Bucket seats on mk1/mk2 mondeo subframes
pair of front bucket seats which are "Ektor"
same as these here, they cost £83 each new (without subframes):
http://racemodz.co.uk/shop/item.asp?itemid=1505
they are bolted down onto mondeo subframes, and will bolt straight into a mk1 or mk2 mondeo, and use the standard seatbelt. mine has passed the MOT with them fitted. or you can use harnasses instead
the drivers seat has the mondeo leccy seat motor fitted (these go for £35 on ebay) and is fully working using the switch as normal.
the drivers seat has had a repair on the RH arm, and they are in good condition
looking for £60 for the pair
collection preferred (from near cambridge in cambridgeshire), courier could be arranged
same as these here, they cost £83 each new (without subframes):
http://racemodz.co.uk/shop/item.asp?itemid=1505
they are bolted down onto mondeo subframes, and will bolt straight into a mk1 or mk2 mondeo, and use the standard seatbelt. mine has passed the MOT with them fitted. or you can use harnasses instead
the drivers seat has the mondeo leccy seat motor fitted (these go for £35 on ebay) and is fully working using the switch as normal.
the drivers seat has had a repair on the RH arm, and they are in good condition
looking for £60 for the pair
collection preferred (from near cambridge in cambridgeshire), courier could be arranged
Last edited by percybigun; 29-04-2009 at 02:39 PM. Reason: sold
#4
Twistin me melon man
Thread Starter
Join Date: Jul 2004
Location: Cambs UK
Posts: 1,998
Likes: 0
Received 0 Likes
on
0 Posts
piece of piss. just rip the old cushions and covers off, and use some 4 sturdy brackets for each seat. i think that alot of bucket seats already come with the brackets?
on these the rears brackets lined up with holes in the subframe for bolting. the fronts needed holes drilling in the sub frames for the bolts.
on these the rears brackets lined up with holes in the subframe for bolting. the fronts needed holes drilling in the sub frames for the bolts.
Thread
Thread Starter
Forum
Replies
Last Post
155lee
Ford RS Turbo Parts for Sale
20
24-10-2015 11:11 AM
dirty-diesel
Non Ford parts & other stuff for sale
5
29-09-2015 07:25 PM