Dashboard lights
24-04-2012, 11:06 AM
#1
Regular Contributor
Thread Starter
Dashboard lights
Hi all a quick question. How many lights flash up on your dash at start up of a st170. I get 6 all on the right hand side just wondering if I'm missing bulbs or they have blown.
24-04-2012, 03:40 PM
#2
Boosting around the NE
iTrader: (1)
Join Date: Apr 2010
Location: County Durham
Posts: 678
Likes: 0
Received 0 Likes
on
0 Posts
Not 100% ON st170'S but alot of Focus's use a similiar binnacle so there will be blanks for the ones not suitable for your model. Off hand though doesnt the ST170 have unique binnacle for the model?
You tried the dashboard test function to confirm which lights are present?
Rob
You tried the dashboard test function to confirm which lights are present?
Rob
24-04-2012, 09:07 PM
#5
PassionFord Post Whore!!
http://www.fordst170.co.uk/useful.php
Self Diagnostics Mode
The Self Diagnostics Mode gives you in-depth information about your engine and the actual numbers in digital. To use it, follow the steps:
Insert Key but do not turn it on
Press and hold the Trip Meter Reset Button
While holding the reset button, start your car and continue holding the button
Within 10 seconds, the display should change to "test" in LCD font and the needles will do a full sweeping. Release the Button
Pressing the button will now cycle through some 17 different modes
1.Shows a Gauge Sweep
2. Shows all 8's on the LCD (LCD TEST)
3. Illuminates all the bulbs on the dash
4. Displays hexadecimal value for ROM level
5. Displays the hexadecimal value for EE level
6. Shows DTC (Diagnostic Trouble Code)
7. Digital Speedometer - mph
8. Digital Speedometer - kph
9. N/A
10. Digital tachometer
11.Fuel volume
12. Engine coolant temperature
13. Battery voltage
14. ABS fail
15. Electronic brake distribution (EBD) failure
16. Illumination
17. Crank Sense
The Self Diagnostics Mode gives you in-depth information about your engine and the actual numbers in digital. To use it, follow the steps:
Insert Key but do not turn it on
Press and hold the Trip Meter Reset Button
While holding the reset button, start your car and continue holding the button
Within 10 seconds, the display should change to "test" in LCD font and the needles will do a full sweeping. Release the Button
Pressing the button will now cycle through some 17 different modes
1.Shows a Gauge Sweep
2. Shows all 8's on the LCD (LCD TEST)
3. Illuminates all the bulbs on the dash
4. Displays hexadecimal value for ROM level
5. Displays the hexadecimal value for EE level
6. Shows DTC (Diagnostic Trouble Code)
7. Digital Speedometer - mph
8. Digital Speedometer - kph
9. N/A
10. Digital tachometer
11.Fuel volume
12. Engine coolant temperature
13. Battery voltage
14. ABS fail
15. Electronic brake distribution (EBD) failure
16. Illumination
17. Crank Sense
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM
Steve Escos
Ford RS Turbo Parts for Sale
0
01-10-2015 06:57 AM
deathrider666
Technical help Q & A
3
28-09-2015 06:12 PM
