Ford Focus RS This forum is for discussion of all things pertaining to the Ford Focus RS Range.

lowering a focus

Thread Tools
 
Search this Thread
 
Old Jan 30, 2009 | 03:25 PM
  #1  
anodised's Avatar
anodised
Thread Starter
I've found that life I needed.. It's HERE!!
 
Joined: Apr 2005
Posts: 1,096
Likes: 0
From: Northants
Default lowering a focus

hi all got a lowering kit just springs for my focus and have changed the fronts

but the cant seam to work out how to change the rear springs so does any one know how

thanks

lewis
Reply
Old Jan 30, 2009 | 03:33 PM
  #2  
bassboy's Avatar
bassboy
PassionFord Post Troll
20 Year Member
Liked
 
Joined: May 2004
Posts: 3,386
Likes: 64
Default

pain in the backside mate! you will need to ideally take off the the bolt holding the bottom arm at the bottom of the spring...but as normal focus style, they are probably siezed on...which will mean new bushes time as you wont get them out without damaging them!

I gave up on mine and took them to a place with a ramp who put a big bar over the spring while someone put as much weight on the wheel as possible to give it extra room and wedge it out...dangerous but thats the only option we had without taking the car off the road till new bushes arrived!

bassboy
Reply
Old Jan 30, 2009 | 03:39 PM
  #3  
anodised's Avatar
anodised
Thread Starter
I've found that life I needed.. It's HERE!!
 
Joined: Apr 2005
Posts: 1,096
Likes: 0
From: Northants
Default

ok then thanks for that will give it to my mate and let him do it at his work shop


ur right about being siezed on thats why i gave up

im so glad its not my car working on mk4 escorts is so much easier
Reply
Old Feb 1, 2009 | 05:48 PM
  #4  
RS03 PAT's Avatar
RS03 PAT
Virgin
 
Joined: Jul 2008
Posts: 5
Likes: 0
Default

You unbolt bottom shock bolts and rollbar links then just pull down hard on the top coil of the spring. Be carefull of your fingers. The new shorter springs go in a lot easier
Reply
Old Feb 2, 2009 | 10:17 AM
  #5  
RichieST's Avatar
RichieST
15K+ Super Poster!!
iTrader: (2)
 
Joined: Aug 2004
Posts: 18,732
Likes: 449
From: Wiltshire
Default

As above, undo the shock bolts and the arb, then put spring compressors inside the spring (there is a big hole in the bottom cup you can put them up through), tighten then up and out it comes!
Reply
Old Feb 2, 2009 | 11:46 AM
  #6  
anodised's Avatar
anodised
Thread Starter
I've found that life I needed.. It's HERE!!
 
Joined: Apr 2005
Posts: 1,096
Likes: 0
From: Northants
Default

Originally Posted by Rich170
As above, undo the shock bolts and the arb, then put spring compressors inside the spring (there is a big hole in the bottom cup you can put them up through), tighten then up and out it comes!

thanks i was thinking could i fit them inside the spring its booked in at my mates any was so will tell him thanks for all ur help

lewis
Reply
Old Feb 21, 2009 | 09:20 PM
  #7  
thebigmacmoomin's Avatar
thebigmacmoomin
PassionFord Post Troll
 
Joined: Feb 2009
Posts: 2,587
Likes: 30
From: Devon
Default

Mine took 5.5 hours to change. Thats the front and rears. and was done by RadidFit.

Andrew
Reply

Trending Topics

Old Feb 22, 2009 | 09:59 AM
  #8  
delterflier's Avatar
delterflier
Too many posts.. I need a life!!
 
Joined: Feb 2009
Posts: 629
Likes: 0
From: dundee
Default

hi all

ive been thinking of geting my focus lowered too but how low car you go before causing problems(shes on 17"s)

john
Reply
Old Feb 22, 2009 | 01:35 PM
  #9  
thebigmacmoomin's Avatar
thebigmacmoomin
PassionFord Post Troll
 
Joined: Feb 2009
Posts: 2,587
Likes: 30
From: Devon
Default

50mm would be ok. Maybe lower on Coilovers.

The best option is the Eibach springs. You can buy them from Fords to no problems with warrenty. They only lower it 30mm, but are very highly recomended on FFOC. A big improvement espically with 17"s. 30mm is ok to still use standard shocks, but if any lower, the shocks would need to be upgraded.

My 2 Focus's both had the Eibach's. They were great. Looked fantastic even when I took the 17"s off and put the standard 15"s back on. Very low.

Andy

Last edited by thebigmacmoomin; Feb 22, 2009 at 01:38 PM.
Reply
Old Feb 25, 2009 | 08:07 PM
  #10  
BIG.GEOFF.H's Avatar
BIG.GEOFF.H
Too many posts.. I need a life!!
 
Joined: Apr 2005
Posts: 895
Likes: 0
From: BOLTON-lancashire
Default

i did the misses focus rs and i used the big pry bar and got them out and put the coil over springs in
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
155lee
Ford RS Turbo Parts for Sale
4
Sep 6, 2016 11:10 AM
rogerxr3i
General Car Related Discussion.
8
Sep 13, 2015 06:56 PM
natehall
Ford Focus (All Models)
5
Sep 8, 2015 05:13 AM
Adam Graham
Restorations, Rebuilds & Projects.
7
Sep 6, 2015 06:04 AM
rsturbo27
General Car Related Discussion.
3
Sep 5, 2015 05:08 PM




All times are GMT. The time now is 07:11 AM.