Boost controllers and engine advantages
Thread Starter
Too many posts.. I need a life!!
Joined: Jul 2005
Posts: 950
Likes: 0
From: Herts(under a s2 with a centrino laptop)
Last week i fitted an apexi boost controller to my focus rs and on friday had the car setup by EA.
All i have to say is there a top bunch of blokes down there very nice and what they dont no about the focus you could write on a postage stamp.
The apexi boost controller is the nuts and after seeing the blitz it's gotta be apexi all the way.
I was well happy after getting 301.3 bhp and 348 lbs/ft @ 1.3 Bar
Cheers,
Jim
All i have to say is there a top bunch of blokes down there very nice and what they dont no about the focus you could write on a postage stamp.
The apexi boost controller is the nuts and after seeing the blitz it's gotta be apexi all the way.
I was well happy after getting 301.3 bhp and 348 lbs/ft @ 1.3 Bar
Cheers,
Jim
Thread Starter
Too many posts.. I need a life!!
Joined: Jul 2005
Posts: 950
Likes: 0
From: Herts(under a s2 with a centrino laptop)
I have a decat, manifold, bluefin, boost controller 18-19 psi
It's setup spot on the way they have set the boost controller has made it such a better car no wheel spin in first it spot on going for the gt28 next to take it to 370bhp.
Ill put the graph up tomorrow.
Dan if you dont trust me you could always give them a call 01376 502522
cheers,
Jim.
It's setup spot on the way they have set the boost controller has made it such a better car no wheel spin in first it spot on going for the gt28 next to take it to 370bhp.
Ill put the graph up tomorrow.
Dan if you dont trust me you could always give them a call 01376 502522
cheers,
Jim.
Couldn't agree more mate, my Blitz
has transformed my car, is holding around 18-19PSI in top channel.
I made 285.2BHP and 333.5lb/ft yesterday with this...
Ford Motorsport Manifold
Mongoose Decat
Mongoose Exhaust
K&N Gen II
Pro Alloy Charge Cooler
Bluefin
Blitz SBC ID 3
Bailey DV-30
Samco Boost Hoses
Denso Iridium ITV-22's
Magnecor KV80's
The way the boost comes in now in top channel is so aggresive they had big probs with traction on the rollers!
EAs figures do usually seem a bit optimistic tho imo.
has transformed my car, is holding around 18-19PSI in top channel.
I made 285.2BHP and 333.5lb/ft yesterday with this...
Ford Motorsport Manifold
Mongoose Decat
Mongoose Exhaust
K&N Gen II
Pro Alloy Charge Cooler
Bluefin
Blitz SBC ID 3
Bailey DV-30
Samco Boost Hoses
Denso Iridium ITV-22's
Magnecor KV80's
The way the boost comes in now in top channel is so aggresive they had big probs with traction on the rollers!
EAs figures do usually seem a bit optimistic tho imo.
Thread Starter
Too many posts.. I need a life!!
Joined: Jul 2005
Posts: 950
Likes: 0
From: Herts(under a s2 with a centrino laptop)
All cars will come out slight diff ive been told and dont take this the wrong way nath the things like air fliters and the uprated charge coolers are not doing alot for the focus rs.
The boost controll is the tits.
In the lower setting im getting 250bhp just for going to work and back
Still out runs the new st i play with most days... if u are frm harlow and drive past gates every day all i can say is gutted.
Jim
The boost controll is the tits.
In the lower setting im getting 250bhp just for going to work and back
Still out runs the new st i play with most days... if u are frm harlow and drive past gates every day all i can say is gutted.
Jim
You're not worng there mate, my Dad's standard one made 241BHP!
Thing is, once modded, they usually make very similar figures with similar mods.
Trouble is I can't keep mine out of the top setting! It drives great in the lower ones but the temptation is too strong!
I had SCC set mine up.
I'm afraid to say I have to take EAs readings with a pinch of salt after Kev.H got 295BHP there with just Bluefin and full Miltek!
How it performs/drives on the road is the important part though and an aftermarket controller has definately made the world of difference!
Thing is, once modded, they usually make very similar figures with similar mods.Trouble is I can't keep mine out of the top setting! It drives great in the lower ones but the temptation is too strong!
I had SCC set mine up.
How it performs/drives on the road is the important part though and an aftermarket controller has definately made the world of difference!
Thread Starter
Too many posts.. I need a life!!
Joined: Jul 2005
Posts: 950
Likes: 0
From: Herts(under a s2 with a centrino laptop)
Mine made 265 bhp just with a bluefin and this test was not done at EA. i no what u mean mate but what eve all i no it's a fast focus rs and im 100% happy with it.
Cheers,
Jim
Cheers,
Jim
Trending Topics
Originally Posted by JamesS2RS
I have a decat, manifold, bluefin, boost controller 18-19 psi
It's setup spot on the way they have set the boost controller has made it such a better car no wheel spin in first it spot on going for the gt28 next to take it to 370bhp.
Ill put the graph up tomorrow.
Dan if you dont trust me you could always give them a call 01376 502522
cheers,
Jim.
It's setup spot on the way they have set the boost controller has made it such a better car no wheel spin in first it spot on going for the gt28 next to take it to 370bhp.
Ill put the graph up tomorrow.
Dan if you dont trust me you could always give them a call 01376 502522
cheers,
Jim.
Thread Starter
Too many posts.. I need a life!!
Joined: Jul 2005
Posts: 950
Likes: 0
From: Herts(under a s2 with a centrino laptop)
Bore off Steve.
The whole meaning of this post was to say how good an aftermarket boost controller was not to slag off E/A rolling road or there figures.
Cheers,
Jim
The whole meaning of this post was to say how good an aftermarket boost controller was not to slag off E/A rolling road or there figures.
Cheers,
Jim
Originally Posted by NathR
You're not worng there mate, my Dad's standard one made 241BHP!
Thing is, once modded, they usually make very similar figures with similar mods.
Trouble is I can't keep mine out of the top setting! It drives great in the lower ones but the temptation is too strong!
I had SCC set mine up.
I'm afraid to say I have to take EAs readings with a pinch of salt after Kev.H got 295BHP there with just Bluefin and full Miltek!
How it performs/drives on the road is the important part though and an aftermarket controller has definately made the world of difference! 
Thing is, once modded, they usually make very similar figures with similar mods.Trouble is I can't keep mine out of the top setting! It drives great in the lower ones but the temptation is too strong!
I had SCC set mine up.
How it performs/drives on the road is the important part though and an aftermarket controller has definately made the world of difference! 
even if u take off 20bhp I know mine is still very strong
Thread Starter
Too many posts.. I need a life!!
Joined: Jul 2005
Posts: 950
Likes: 0
From: Herts(under a s2 with a centrino laptop)
All rolling roads come out different. It depends how often they are calibrated who’s doing the calibration ect…
All cars will come out diff depending on what petrol you are using ect if you’re an evo reader you would have seen the by putting Tesco 99 octane gave the new golf gti 30bhp on test so you have to take in all factors air temp, petrol, rolling road these so many things that could change the figures at the end of the day.
One thing I no is the focus rs with more is the tit’s and boost controller allows you to blast off the line like you have 4wd the way E/A have set mine up is wicked you would have to drive it to appreciate it.
If your happy and the car feel strong who cares what anyone else is saying.
Cheers,
Jim
All cars will come out diff depending on what petrol you are using ect if you’re an evo reader you would have seen the by putting Tesco 99 octane gave the new golf gti 30bhp on test so you have to take in all factors air temp, petrol, rolling road these so many things that could change the figures at the end of the day.
One thing I no is the focus rs with more is the tit’s and boost controller allows you to blast off the line like you have 4wd the way E/A have set mine up is wicked you would have to drive it to appreciate it.
If your happy and the car feel strong who cares what anyone else is saying.
Cheers,
Jim
Originally Posted by NathR
Couldn't agree more mate, my Blitz
has transformed my car, is holding around 18-19PSI in top channel.
I made 285.2BHP and 333.5lb/ft yesterday with this...
Ford Motorsport Manifold
Mongoose Decat
Mongoose Exhaust
K&N Gen II
Pro Alloy Charge Cooler
Bluefin
Blitz SBC ID 3
Bailey DV-30
Samco Boost Hoses
Denso Iridium ITV-22's
Magnecor KV80's
The way the boost comes in now in top channel is so aggresive they had big probs with traction on the rollers!
EAs figures do usually seem a bit optimistic tho imo.
has transformed my car, is holding around 18-19PSI in top channel.
I made 285.2BHP and 333.5lb/ft yesterday with this...
Ford Motorsport Manifold
Mongoose Decat
Mongoose Exhaust
K&N Gen II
Pro Alloy Charge Cooler
Bluefin
Blitz SBC ID 3
Bailey DV-30
Samco Boost Hoses
Denso Iridium ITV-22's
Magnecor KV80's
The way the boost comes in now in top channel is so aggresive they had big probs with traction on the rollers!
EAs figures do usually seem a bit optimistic tho imo.
I know where you're coming from mate and did consider it. It put me off as it's something else to mount, which would then look ugly, my controller is spot on, on it's own...


Other thing that put me off is the fact that there's more factors than what speed you're doing as to what boost you want, ie weather conditions, would rather fiddle with my new toy as I go!


Other thing that put me off is the fact that there's more factors than what speed you're doing as to what boost you want, ie weather conditions, would rather fiddle with my new toy as I go!
Thread
Thread Starter
Forum
Replies
Last Post
gchristophi
Ford Sierra/Sapphire/RS500 Cosworth
19
Aug 31, 2015 10:36 PM
Escortdriver1
Ford RS Cosworth Parts for Sale
1
Jul 31, 2015 02:36 PM



