Manifold wanted
#1
15000
Thread Starter
Join Date: Apr 2006
Location: Ireland
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Manifold wanted
Just wondering does anybody know of a second hand primary designs manifold for sale..(or any other make)I dont really fancy spending 1300 quid! Do they make for a better drive?
Danny
Danny
#2
PD Manifold
Fitted mine at the weekend and it is very good, loads of mid range power and lots more torque in each gear. It is very expensive though.
The quality of the welds are excellent.
Dan
The quality of the welds are excellent.
Dan
#3
15000
Thread Starter
Join Date: Apr 2006
Location: Ireland
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Hi Dan
Which manifold did you get? Was it difficult to fit? I`v just seen pumaspeed advertising a Miltek one for 650..Do you know are they any good?
Cheers
Danny
Which manifold did you get? Was it difficult to fit? I`v just seen pumaspeed advertising a Miltek one for 650..Do you know are they any good?
Cheers
Danny
#4
PD Manifold
I fitted the Primary Designs Manifold with Coating.
It was a bit of a nightmare to fit, they dont leave much space for tightening the bolts, i had someone with some expreience help me. Make sure you get a new gasket for the manifold from ford.
Pumaspeed haev been advertising the Milltek manifold for AGES, but it never materializes. I got bored of waiting, no ones really sure how good it will be yet.
I would wait for a second hand PD one, the welds are second to none and the coating helps with under bonnet temps. or just go for the cheaper Ford Motorsport Manifold, i'm sure there is not a huge amount of difference between that and the PD one
Dan
It was a bit of a nightmare to fit, they dont leave much space for tightening the bolts, i had someone with some expreience help me. Make sure you get a new gasket for the manifold from ford.
Pumaspeed haev been advertising the Milltek manifold for AGES, but it never materializes. I got bored of waiting, no ones really sure how good it will be yet.
I would wait for a second hand PD one, the welds are second to none and the coating helps with under bonnet temps. or just go for the cheaper Ford Motorsport Manifold, i'm sure there is not a huge amount of difference between that and the PD one
Dan
#5
15000
Thread Starter
Join Date: Apr 2006
Location: Ireland
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Ford Manifold?
Where do I source one of these?At my local dealer!..Are they any good? I was also wondering if you found out what was making the squeling sound from your car..I have the same problem Did your manifold make any difference to the sound of your car?
#6
Manifold
I bit the bullet and just bought one new. Thought that I could sell it for a fair bit of cash once I'm done with it.
It didnt really change the sound of the car, maybe a little louder. But in 4th Gear it feels like it has extra ummf at 5000RPM it just keeps pulling
Dan
It didnt really change the sound of the car, maybe a little louder. But in 4th Gear it feels like it has extra ummf at 5000RPM it just keeps pulling
Dan
#7
Part of the Furniture
Join Date: Aug 2005
Location: Yeovil, Somerset
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ford Manifold?
Originally Posted by DannyO
Where do I source one of these?At my local dealer!..Are they any good? I was also wondering if you found out what was making the squeling sound from your car..I have the same problem Did your manifold make any difference to the sound of your car?
Trending Topics
#8
Regular Contributor
Join Date: Feb 2006
Location: Scotland
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Shins over on the RS owners club forum is trying to organise a group buy of PD manifolds for FRS owners and the more orders he gets the better the discount. So hop over to that forum and note an interest and you might get it for a fair bit less than £1300.
Thread
Thread Starter
Forum
Replies
Last Post