I have a 54 Focus 1.6 Zetec, and GMax 50mm lowering springs, how hard are they to fit?

Thanks

 

depends wot u have to use, I had a full workshop to use and it was easy. i didn't need a ramp but a couple of jacks and axel stands were more then useful.

 

Yep its easy. but again had a workshop with ramp and air tools ect


Dave

 

On the subject of springs do all lowering springs fit all focus's. I ask this because every supplier seems to state something diffrent.
For example, one manufacture lists one for the zetec, one for the ST / RS, another lists one for all focus's, yet another lists one for 1.4 - 2.0, another for the TDCI and another for the ST and does not list the RS.

 

flick out rear springs dont try to seperate rear suspension cud cost you alot as the bolts usually seize

 

Sorted guys, took 3 hrs of very slow labour, weren't breaking my back.

Squeezed some spring compressors in the rears, dropped the shocker, priased the springs out with a bar, piece of pish

Here's the result...

 

They'll be different due to the weight of the engine.