Rs focus 280mm Brakes Now Complete Step By Step.Mk4/5 &
#1
Virgin
Thread Starter
Join Date: Dec 2005
Location: Lakeside Essex
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thanks Once again to My Mate Graham (Nugget) My Rear Conversion is now Complete :thumbsup:
Parts Needed to carry out this conversion are as follows.
ST170 280mm Rear Discs EBC £125.RS focus 0r ST170 Calipers & Carriers & ST170 Rear hubs Between £150 & £250. Pads £45 4x Braided Hoses £50.ST150 HandBrake Cable £45.ST170 BracketB/Hose £8
![Name: RSRears.jpg
Views: 2042
Size: 62.3 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148062d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-rsrears.jpg)
ST170 Rear Hubs
![Name: DSCF1056.jpg
Views: 1380
Size: 62.1 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148063d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-dscf1056.jpg)
2x 150mm Braided Hoses.2x 300mm Braided Hoses
![Name: DSCF1008.jpg
Views: 844
Size: 59.4 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148064d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-dscf1008.jpg)
ST150 Handbrake Cable Part No 1211024
![Name: ST150HB.jpg
Views: 906
Size: 50.3 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148065d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-st150hb.jpg)
Lift of Trim around handbrake Leverand slacken off Cable using 10mm Spanner
![Name: HandbrakeAdjuster.jpg
Views: 2756
Size: 53.6 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148066d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-handbrakeadjuster.jpg)
Clamp Brake Hoses
![Name: ClampBrakePipe.jpg
Views: 898
Size: 37.3 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148067d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-clampbrakepipe.jpg)
Disconnect Cable from Drums
![Name: DrumCable1.jpg
Views: 812
Size: 24.0 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148068d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-drumcable1.jpg)
Undo Two 8mm bolts and remove ABS Sensor (if Fitted)
Remove Hub Nut Coverand using a 30mm socket undo the Nut and take drum off
![Name: DSCF1083.jpg
Views: 3079
Size: 40.2 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148069d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-dscf1083.jpg)
Undo Brake pipes at rear of Drum using 11mm Spanner
Use a 17mm socket on 4 nuts on rear of Stub axle and remove
Drill out the two Rivets which hold the Splash gaurd in place
![Name: DSCF1084.jpg
Views: 1669
Size: 38.8 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148070d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-dscf1084.jpg)
Mount ST170 Hubs using 13mm socket applyThreadlock to each nut 4 in total
and mount disc.attach the ST170 Hose bracket at the same time
![Name: ST170PipeBracket.jpg
Views: 844
Size: 33.5 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148071d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-st170pipebracket.jpg)
![Name: 280mmDiscs.jpg
Views: 850
Size: 43.7 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148072d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-280mmdiscs.jpg)
Attach Carrier
![Name: Carrier1.jpg
Views: 1057
Size: 47.7 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148073d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-carrier1.jpg)
Connect the 150mm hoses to the calipers
![Name: 150mmHose.jpg
Views: 847
Size: 37.7 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148074d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-150mmhose.jpg)
Fit Pads and put Caliper on using the two 13mm bolts
![Name: Complete.jpg
Views: 926
Size: 56.6 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148075d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-complete.jpg)
Disconnect Brake hose from Body.and attach 300mm Braided Hose
![Name: 373738d2.jpg
Views: 822
Size: 37.1 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148076d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-373738d2.jpg)
Secure Braided hose in new Bracket
![Name: 373738d2.jpg
Views: 822
Size: 37.1 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148076d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-373738d2.jpg)
Take old hanbrake off car and pull out Black gromet rom linkage.The heat sheild will haveto by pulled down to access this part.
![Name: RearH.jpg
Views: 823
Size: 60.2 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148078d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-rearh.jpg)
clip new Handbrake cable back up behind heatshield and attach to Calipers
![Name: 1d75d755.jpg
Views: 869
Size: 33.6 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148079d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-1d75d755.jpg)
Bleed Brakes 1st then Adjust Hanbrake cable up and replave trim around Handbrake
![Name: HandbrakeAdjuster.jpg
Views: 2756
Size: 53.6 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148066d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-handbrakeadjuster.jpg)
Job Done
Heres a few more pics
ance:
![](https://i18.photobucket.com/albums/b149/Die-Cast-Are-Us/ST220%20300mm%20Conversion/d99c7448.jpg)
![](https://i18.photobucket.com/albums/b149/Die-Cast-Are-Us/ST220%20300mm%20Conversion/92b79406.jpg)
![Name: e8f5797c.jpg
Views: 868
Size: 73.4 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148081d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-e8f5797c.jpg)
![Name: 68a692ec.jpg
Views: 797
Size: 57.0 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148082d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-68a692ec.jpg)
![Name: 63340de0.jpg
Views: 857
Size: 61.6 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148083d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-63340de0.jpg)
I will Reduce the size of the pics shortly.
Parts Needed to carry out this conversion are as follows.
ST170 280mm Rear Discs EBC £125.RS focus 0r ST170 Calipers & Carriers & ST170 Rear hubs Between £150 & £250. Pads £45 4x Braided Hoses £50.ST150 HandBrake Cable £45.ST170 BracketB/Hose £8
![Name: RSRears.jpg
Views: 2042
Size: 62.3 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148062d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-rsrears.jpg)
ST170 Rear Hubs
![Name: DSCF1056.jpg
Views: 1380
Size: 62.1 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148063d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-dscf1056.jpg)
2x 150mm Braided Hoses.2x 300mm Braided Hoses
![Name: DSCF1008.jpg
Views: 844
Size: 59.4 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148064d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-dscf1008.jpg)
ST150 Handbrake Cable Part No 1211024
![Name: ST150HB.jpg
Views: 906
Size: 50.3 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148065d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-st150hb.jpg)
Lift of Trim around handbrake Leverand slacken off Cable using 10mm Spanner
![Name: HandbrakeAdjuster.jpg
Views: 2756
Size: 53.6 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148066d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-handbrakeadjuster.jpg)
Clamp Brake Hoses
![Name: ClampBrakePipe.jpg
Views: 898
Size: 37.3 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148067d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-clampbrakepipe.jpg)
Disconnect Cable from Drums
![Name: DrumCable1.jpg
Views: 812
Size: 24.0 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148068d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-drumcable1.jpg)
Undo Two 8mm bolts and remove ABS Sensor (if Fitted)
Remove Hub Nut Coverand using a 30mm socket undo the Nut and take drum off
![Name: DSCF1083.jpg
Views: 3079
Size: 40.2 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148069d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-dscf1083.jpg)
Undo Brake pipes at rear of Drum using 11mm Spanner
Use a 17mm socket on 4 nuts on rear of Stub axle and remove
Drill out the two Rivets which hold the Splash gaurd in place
![Name: DSCF1084.jpg
Views: 1669
Size: 38.8 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148070d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-dscf1084.jpg)
Mount ST170 Hubs using 13mm socket applyThreadlock to each nut 4 in total
and mount disc.attach the ST170 Hose bracket at the same time
![Name: ST170PipeBracket.jpg
Views: 844
Size: 33.5 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148071d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-st170pipebracket.jpg)
![Name: 280mmDiscs.jpg
Views: 850
Size: 43.7 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148072d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-280mmdiscs.jpg)
Attach Carrier
![Name: Carrier1.jpg
Views: 1057
Size: 47.7 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148073d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-carrier1.jpg)
Connect the 150mm hoses to the calipers
![Name: 150mmHose.jpg
Views: 847
Size: 37.7 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148074d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-150mmhose.jpg)
Fit Pads and put Caliper on using the two 13mm bolts
![Name: Complete.jpg
Views: 926
Size: 56.6 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148075d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-complete.jpg)
Disconnect Brake hose from Body.and attach 300mm Braided Hose
![Name: 373738d2.jpg
Views: 822
Size: 37.1 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148076d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-373738d2.jpg)
Secure Braided hose in new Bracket
![Name: 373738d2.jpg
Views: 822
Size: 37.1 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148076d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-373738d2.jpg)
Take old hanbrake off car and pull out Black gromet rom linkage.The heat sheild will haveto by pulled down to access this part.
![Name: RearH.jpg
Views: 823
Size: 60.2 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148078d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-rearh.jpg)
clip new Handbrake cable back up behind heatshield and attach to Calipers
![Name: 1d75d755.jpg
Views: 869
Size: 33.6 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148079d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-1d75d755.jpg)
Bleed Brakes 1st then Adjust Hanbrake cable up and replave trim around Handbrake
![Name: HandbrakeAdjuster.jpg
Views: 2756
Size: 53.6 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148066d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-handbrakeadjuster.jpg)
Job Done
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
Heres a few more pics
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![](https://i18.photobucket.com/albums/b149/Die-Cast-Are-Us/ST220%20300mm%20Conversion/d99c7448.jpg)
![](https://i18.photobucket.com/albums/b149/Die-Cast-Are-Us/ST220%20300mm%20Conversion/92b79406.jpg)
![Name: e8f5797c.jpg
Views: 868
Size: 73.4 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148081d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-e8f5797c.jpg)
![Name: 68a692ec.jpg
Views: 797
Size: 57.0 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148082d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-68a692ec.jpg)
![Name: 63340de0.jpg
Views: 857
Size: 61.6 KB](https://passionford.com/forum/attachments/fiesta-rs1800-rs-turbo/148083d1502131792-rs-focus-280mm-brakes-now-complete-step-by-step-mk4-5-and-63340de0.jpg)
I will Reduce the size of the pics shortly.
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
#3
Too many posts.. I need a life!!
Join Date: Sep 2006
Location: Lincoln
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
#4
Advanced PassionFord User
iTrader: (2)
Join Date: Apr 2009
Location: BC, Canada
Posts: 2,229
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I done this conversion on my MK6 Escort with ABS and it didnt cost that much ... ![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
The Puma shares the same ABS sensor and Collector as the MK6 .. You need to get the Hubs machined for the collector and drill the Spindal for the ABS sensor.
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
The Puma shares the same ABS sensor and Collector as the MK6 .. You need to get the Hubs machined for the collector and drill the Spindal for the ABS sensor.
#5
![Default](https://passionford.com/forum/images/icons/icon1.gif)
How difficult was it adjusting the spindle etc for the sensor
CHeers
Dan
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM