bleeding cooling system ???
Thread Starter
Wahay!! I've lost my Virginity!!
Joined: Jul 2005
Posts: 67
Likes: 0
From: York,North Yorkshire
just wondering if anyone knows the best way to bleed the cooling system on the s2.mine was fine and didn't get hot in traffic then fitted a new fan switch and now it gets red hot.possible air lock or thermostat ?????? fan doesn't work automatically anymore either
cheers
cheers
The system is self bleeding, and very rarely will u get an air lock. To get rid of air, run the car to temp with the header tank cap off, let it cool back down and replace.
Does it just get hot in traffic? If so, its faulty fan switch.
Does it just get hot in traffic? If so, its faulty fan switch.
Thread Starter
Wahay!! I've lost my Virginity!!
Joined: Jul 2005
Posts: 67
Likes: 0
From: York,North Yorkshire
thanks for that
car is fine when driving but yes when stuck in traffic or even just crawling round town temps go through the roof up to the O on the temp gauge this is with the fan on as i had to wire it up to a switch but it doesn't make a shit of difference.
car is fine when driving but yes when stuck in traffic or even just crawling round town temps go through the roof up to the O on the temp gauge this is with the fan on as i had to wire it up to a switch but it doesn't make a shit of difference.
Trending Topics
Hiya guys,
My turbo orion is playing me up, my heater blower dont work but the pipes going in to the back of the heater matrix are hot, the fan kicks in and out, when the fan jumps in the coolant drops the when fan cut out the res fills slowly back up, my problem is that a few days ago my top hose adopted a small pin hole which as you can gather when pressure built up it sprayed all over the rad, with this the car was temping between the 0 and the R on the gadge. NOW with the hose replaced and everything working. pipes hot, fan working the temp gadge stays near the L and the A ( bottom of the gadge just of the blue. ive tryed bleeding the darn thing and everything still remains the same. Its doesnt smell and nothing out of the ordinary is acuring. what say you guys. gallon of petrol and a match comes to mind lol
My turbo orion is playing me up, my heater blower dont work but the pipes going in to the back of the heater matrix are hot, the fan kicks in and out, when the fan jumps in the coolant drops the when fan cut out the res fills slowly back up, my problem is that a few days ago my top hose adopted a small pin hole which as you can gather when pressure built up it sprayed all over the rad, with this the car was temping between the 0 and the R on the gadge. NOW with the hose replaced and everything working. pipes hot, fan working the temp gadge stays near the L and the A ( bottom of the gadge just of the blue. ive tryed bleeding the darn thing and everything still remains the same. Its doesnt smell and nothing out of the ordinary is acuring. what say you guys. gallon of petrol and a match comes to mind lol
I've had the car about a month now and on buying it I was asured that it had new cambelt, filters and it had a new stat as the previeus owner did some head damage. But I will change stat as even a new one can fail
Thank you for your speedy reply and I will post the out come ...
Thank you for your speedy reply and I will post the out come ...
Thread
Thread Starter
Forum
Replies
Last Post





