When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I didnt missunderstand you - it cuts in (turns the fan on) at 86deg. It will be stamped on the side with this figure. As it cools the engine, it cuts out again at about 82 degrees. A combination of the 2 parts will try to keep the engine between 82 and 86 degrees.
If you got connections at Ford, the stats cost about 4 quid. And for about 20p you can get a new fibre washer for your new switch - 6005731.
ahhh cheers for clearin that up lol
thought u was talkin about the thermostat
will get on the blower to fords then n have a chat to me mate there
I wouldn't even bother getting my Grinder/Dremel out if I could buy one for a tenner. I don't make any money out of these, thats not my reason for doing it.
I wouldn't even bother getting my Grinder/Dremel out if I could buy one for a tenner. I don't make any money out of these, thats not my reason for doing it.
If only I had known that. But I made it fit, and it sorted my temp problem
16-04-2005, 06:26 PM
