Hi Guys.

Im looking at a set of Comp TH for my escort rs, however they are on my mates Pug at the moment which is ok as know they will fit, but my question is they are 15" x 6J and offset of ET15.

Now i know its smaller than the standard 15" x 7j but think that will be ok, but if i put 20mm spacers on will that be ok to match the ET35 offset that i need?

Cheers for any help - Jamie

 

et confuses the hell out of me

im sure the std wheel is 6x15 et 35
the et 15 wheel will be pushed right out from the hub (further from shock)
so adding a 20mm spacer will make them et-5

to make them et35 you would need to machine the mounting face down by 20mm

i could have this arse about face but someone will correct me im sure

 

Hi mate thanks for the reply! Yes me too, thought the spaded would sort it may have to give them a miss then!

Sure standard s2 wheels are 15 x 7j?

 

Standard s2 wheels are 15x6j with an offset of 36.5 to be precise lol! As Gus has rightly said, et15 will stick out like a bastard!

 

Thanks for the help lads, will leave them and get ford ones

 

this site can be quite useful mate, if you have the size of tyres, rim and offset it'll let you know how far in or out the new wheels will sit

http://www.rimsntires.com/specs.jsp

 

Standard alloys are 6.5J. Look for a set that is 7J

 

cool will look on that site mate cheers

yes will look out for 7s as well bud

 

ET15 will stick out the arches.