APEXi-ATS-Active-Tail-Silencer
#1
Too many posts.. I need a life!!
Thread Starter
iTrader: (7)
Join Date: Jun 2007
Location: Cotswold
Posts: 551
Likes: 0
Received 0 Likes
on
0 Posts
![Question](https://passionford.com/forum/images/icons/icon5.gif)
Hi anyone got any knowledge of these at all regarding sizeing
i was under the impression its either 90mm or 115mm which both seem to big
ive emailed them asking about one for a 3" tail pipe and he recommend this
http://www.wbperformance.com/store-p...8.html#reviews
which unless am totally thick or am i missing summit real obvous is 4 1/2"
Apreaite any help
Regards Blunt.RS
i was under the impression its either 90mm or 115mm which both seem to big
ive emailed them asking about one for a 3" tail pipe and he recommend this
http://www.wbperformance.com/store-p...8.html#reviews
which unless am totally thick or am i missing summit real obvous is 4 1/2"
Apreaite any help
Regards Blunt.RS
#3
#1 in Spelling Club
iTrader: (14)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
As above, they were made to suit their own exhausts, hence the odd sizes and Jap exhausts are usually all big.
I ran one in my RST, but I had the 4" tailpipe. I used the smaller Apexi ATS and had an Alloy sleeve made to make it fit nicely. Can be seen in my project thread somewhere in the deep dark depths of the resto section.
I ran one in my RST, but I had the 4" tailpipe. I used the smaller Apexi ATS and had an Alloy sleeve made to make it fit nicely. Can be seen in my project thread somewhere in the deep dark depths of the resto section.