just had my chip and dash31 done
#1
just had my chip and dash31 done
first of all iwould like to give a big shout out to MAD FOR IT ,, for a top notch job to my rst
115.5 bhp @ wheels
145.3 bhp@ fly wheel
102lbs/ft torque
not only does it GLF now its very hairy to keep on the road hope it stays dry now
thanks again colin @ mad for it
115.5 bhp @ wheels
145.3 bhp@ fly wheel
102lbs/ft torque
not only does it GLF now its very hairy to keep on the road hope it stays dry now
thanks again colin @ mad for it
#2
Regular Contributor
Join Date: Jun 2003
Location: NORTHANTS
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
thats not bad matey but only 13bhp over standard is that coz its a van? my escort has a chip , exhaust, induction kit and a piper cam and is now running somehwere just under 180bhp
#4
pass had it checked out when i bought it by colin and he siad it was running fine for standerd as b4 it was running 124@fly and 93ish atwheels but the above is all its had done apart from a rage b/box
Trending Topics
#11
Well mine is one of them cars! 154bhp@fly wheel.....149ft/lb of torque!
Tho right now since the mot and my emissions have been turned down..i can only muster 7psi! ..time for the rolling road.....again!
Tho right now since the mot and my emissions have been turned down..i can only muster 7psi! ..time for the rolling road.....again!
#12
colins has set it so i dont blow it up as i have a vans 1.4 gearbox and would distroy it thats what hes said ,,,, #
as for mad for it he is a very cool bloke would reccomend him any day
as for mad for it he is a very cool bloke would reccomend him any day
#13
I've found that life I needed.. It's HERE!!
Join Date: Jun 2003
Location: Exeter, Devon
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
anyone know of anywhere else in cornwall where i can get a ERST setup cos my engine is poorly??
He sets your engine up to give max power to reliabilty rather than peaking it and ignoring the fact it might blow up a few weeks later.
#14
sounds good reliability is what im after, recently a friend of mine had his setup by a tuner in plymouth and a week later dropped a piston
ever heard of richards bros?? they reckon they can do it properly but they've not got a RR , and they are alot closer which is good as its running well bad
ever heard of richards bros?? they reckon they can do it properly but they've not got a RR , and they are alot closer which is good as its running well bad
#15
I've found that life I needed.. It's HERE!!
Join Date: Jun 2003
Location: Exeter, Devon
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
recently a friend of mine had his setup by a tuner in plymouth and a week later dropped a piston
Not heard of Richard Bros though.
#16
AJs, but to be fair the car had problems anyways, boiling water etc. but he still whacked the boost up to 15psi
theyre in redruth and are fuel injection specialists but not got a RR
theyre in redruth and are fuel injection specialists but not got a RR
#22
Originally Posted by b3mwe
rich bros are very good i deal with them through where i work but the do all cars cant knock them
#23
My rst is running 150bhp @10 psi. With magnex. magnecore leads k&n 159 pound torque its had a bottem end rebuild and is going on the rollers 2 check the power then have a chip /actuator should be 185/190 bhp.
#30
I've found that life I needed.. It's HERE!!
Join Date: Jun 2003
Location: Exeter, Devon
Posts: 1,053
Likes: 0
Received 0 Likes
on
0 Posts
4 speed still ave your st big boy
any way would a 1.8d jobby do it or not
#31
what you trying to say devon boy
that your easter egg given to amy
Peeps only really put em in v high powered ones (with plenty of lb/ft) to get a very much higher top end speed.
#34
#37
Originally Posted by Exeter J
exeterj ok u can have your egg
after crimbo i put on a stone..and im back on slim fast ...then again i dont wanna get back upto 14stone 10!....which im glad to say i aint
#40
3 stone in 3 months ...jesus thatsa bit fast...thats faster than when i was on atkins!!!
im stuck at 13stone now ..been there for a week
hit a bit of a platue by the look of it...i wanna get back down to 12 and half...felt good being that size!
totally of the topic of a -31 and a chip eh.....well eccept the chip!
im stuck at 13stone now ..been there for a week
hit a bit of a platue by the look of it...i wanna get back down to 12 and half...felt good being that size!
totally of the topic of a -31 and a chip eh.....well eccept the chip!