flat spot
01-10-2007 | 12:53 PM
#1
Thread Starter
PassionFord Regular
Joined: Feb 2006
Posts: 386
Likes: 0
From: blackpool
flat spot
hi i have a S2 and it has got a flat spot at 5000rpm to 6000rpm but after 6 it picks back up again any ideas what this could be. I have been told it could be the cam not dialed in right. All help will be great cheers 
01-10-2007 | 07:59 PM
#2
PassionFord Post Troll
Joined: May 2003
Posts: 2,502
Likes: 0
From: northants
not really going to help you now but try being a bit more specific on your car, is it standard, i take its not as you mention the cam being dialled in 
lots of things go wrong on these old cars with even older tech
lots of things go wrong on these old cars with even older tech
02-10-2007 | 09:16 PM
#5
Thread Starter
PassionFord Regular
Joined: Feb 2006
Posts: 386
Likes: 0
From: blackpool
2.1 zvh
big valve head ported
T34 turbo
piper 285 t2
its on cossie management and EFi inlet.
it never did it before the head gasket went the head got stripped down and skimmed and only done it sins its all been back together.
it died at 5000rpm and picks back up at around 6000rpm and pull really hard again.
big valve head ported
T34 turbo
piper 285 t2
its on cossie management and EFi inlet.
it never did it before the head gasket went the head got stripped down and skimmed and only done it sins its all been back together.
it died at 5000rpm and picks back up at around 6000rpm and pull really hard again.
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM