morrison

hiya all,i have a standerd erst with k&n and mongoose exhaust system.Im looking for around 160,170 bhp how can i get this,also how much boost can i run without any damage on a standerd engine thanks for the help

T28 RST

Add a GRS front mount intercooler, bin the filter for a standard airbox, chip it and run 16psi and you will have around 170 - 180bhp

turbo

as above really with a -31, think you can get around the 170-180 brake if you got a heathy engine

zippyobrien

iTrader: (2)

just need a nice chip, set up and -31 actuator, with a front mount, youd be getting close to 200 bhp depending on how healthy your turbo is

morrison

okay cool thanks all,how much is it to get set up?will it be ok 2 run 16psi?that sounds like alot?or am i bn stupid also is it the chip that needs set up so i cant just plug it in, thanks for the help

JimmyBoy

iTrader: (1)

I thought 14psi was about the max you can use on standard pistons.

T28 RST

The pistons will handle 16/17psi

Oranoco

My brothers FRST was peaking at 22psi and holding 19psi on stock pistons with no bother at all for almost two years. Only reason it's apart now is for a freshen up but everything was still good when it came apart.

Wouldn't recomend running at these levels though