Ford Escort RS Cosworth This forum is for discussion of all things pertaining to the Ford Escort Rs Cosworth.

help help help !!!!!!!!

Thread Tools
 
Search this Thread
 
Old Jan 13, 2011 | 06:40 PM
  #1  
adam escort cosworth's Avatar
adam escort cosworth
Thread Starter
I'm Finding My Feet Here Now
 
Joined: Dec 2009
Posts: 113
Likes: 0
From: poole, dorset
Default help help help !!!!!!!!

can anyone help!!!!!!!! 1992 big turbo escos, about 1yr ago i had problems with spluttering on boost and idle probs but it turned out to be the two multiplugs near the headlight (usual escos problem) i have hard wired em removing the plugs!! all has been well since untill recent rain downpours now its doing it again!! if i rev it at idle when its just off idle it splutteres like its losing spark, and the same at 2500 revs and at 3500 revs!!! ive changed every sensor on the engine and checked ecu!!! im wondering if its possible for the soldered joints i did last your to be wet? faulty? anyone ghot an imput????
Reply
Old Jan 13, 2011 | 07:26 PM
  #2  
Chaz888's Avatar
Chaz888
Advanced PassionFord User
 
Joined: May 2010
Posts: 1,908
Likes: 0
From: Somerset
Default

used to have some contact problems with some of my cars try lots of contact lube or vasolin in the block connector then cover with an inner tube
Reply
Old Jan 13, 2011 | 07:34 PM
  #3  
adam escort cosworth's Avatar
adam escort cosworth
Thread Starter
I'm Finding My Feet Here Now
 
Joined: Dec 2009
Posts: 113
Likes: 0
From: poole, dorset
Default

Originally Posted by Chaz888
used to have some contact problems with some of my cars try lots of contact lube or vasolin in the block connector then cover with an inner tube
ive removed the plugs and soldered the wires together!!!!!
Reply
Old Jan 13, 2011 | 09:48 PM
  #4  
cossie4i+'s Avatar
cossie4i+
TT T38 Power
iTrader: (15)
 
Joined: Apr 2005
Posts: 22,368
Likes: 32
From: Somerset
Default

Solder can and does break mate, worth a check

Steve
Reply
Old Jan 13, 2011 | 10:12 PM
  #5  
adam escort cosworth's Avatar
adam escort cosworth
Thread Starter
I'm Finding My Feet Here Now
 
Joined: Dec 2009
Posts: 113
Likes: 0
From: poole, dorset
Default

Originally Posted by cossie4i
Solder can and does break mate, worth a check

Steve
ive tugged at all the soldered wires but all seem stuck together???? mite re do em again !!!! it sorted it last time .
Reply
Old Jan 14, 2011 | 07:42 PM
  #6  
adam escort cosworth's Avatar
adam escort cosworth
Thread Starter
I'm Finding My Feet Here Now
 
Joined: Dec 2009
Posts: 113
Likes: 0
From: poole, dorset
Default

just for everyones future reference i found the problem!!!! after nearly pulling the whole wiring loom out!!!! It was a corroded earth wire to the tps switch (throttle position switch) replaced it and its now perfect again!!! damn wiring!!!! but it had all the symptoms of a map sensor problem, so dont be caught out guys!! thanks for the advise everyone.
Reply




All times are GMT. The time now is 12:23 AM.