MIS Magnesium Inlet Manifold
#42
Too many posts.. I need a life!!
#45
I'm Finding My Feet Here Now
Join Date: Feb 2006
Location: Switzerland at this time :(
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
maybe there are not much left and price depends ever on availability and demand? not sure to be honest, only my thoughts...
but much more essential (for me) is to know: what is the real benefit of them ( 2.0 YB, around 500BHP for example)? ok, they look nice
#46
The reason for the reletive high cost, is because of the high production and machining cost.
Steve
Last edited by steveboyslim; 11-03-2010 at 07:31 AM.
#47
Cossie Paranoia
Join Date: Apr 2006
Location: Cold Norwegian Garage...Brr..
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Would also like to know this. obviously has 8 injector option but what else?
#52
Wahay!! I've lost my Virginity!!
Join Date: Nov 2006
Location: swe
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
there are aluminum copies available for more humane size bags of money. They cost usually around 2500e and are better in the way that you dont need to sandblast and repaint them between every race. A friend of mine has one of these and had it flowed, it flowed 316-318bhp/cylinder(over 1200bhp total) so they are VERY good on distribution and maxflow. They are not that good on low rpm/response although, there are special rallycross div1 models with 4separate roller throttles in the runners. These are said to give an additional 60bhp on middlerange on a div1 spec RC engine. TG racing in Sweden can deliver all these as far as I know.
#53
Caraholic
iTrader: (3)
there are aluminum copies available for more humane size bags of money. They cost usually around 2500e and are better in the way that you dont need to sandblast and repaint them between every race. A friend of mine has one of these and had it flowed, it flowed 316-318bhp/cylinder(over 1200bhp total) so they are VERY good on distribution and maxflow. They are not that good on low rpm/response although, there are special rallycross div1 models with 4separate roller throttles in the runners. These are said to give an additional 60bhp on middlerange on a div1 spec RC engine. TG racing in Sweden can deliver all these as far as I know.
#54
PassionFord Post Whore!!
#56
PassionFord Post Whore!!
I am looking for a proven one on my next 800hp engine as you know 800hp a'nt cheap and the budget does allow it, at the moment I will be using the same as Rods engine.
Mark
#57
Wahay!! I've lost my Virginity!!
Join Date: Nov 2006
Location: swe
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Mike, Looks ok, but I personally dont like the plenum chamber, I dont believe in the theory of distributing air in that direction. If it had like the MIS plenum and airinduction i would say good job!
pictures of the special DIV1 inlet
[img]http://smg.photobucket.com/albums/v2...f2ce851Mik.jpg[/img]
[img]http://smg.photobucket.com/albums/v2...f2ce851Mik.jpg[/img]
Kind Regards
pictures of the special DIV1 inlet
[img]http://smg.photobucket.com/albums/v2...f2ce851Mik.jpg[/img]
[img]http://smg.photobucket.com/albums/v2...f2ce851Mik.jpg[/img]
Kind Regards
Last edited by Mike Rainbird; 14-10-2008 at 08:44 AM. Reason: Make photos instantly viewable
#58
Too many posts.. I need a life!!
Join Date: Jul 2004
Location: norway
Posts: 868
Likes: 0
Received 0 Likes
on
0 Posts
do you know the price on those?
Last edited by capri-rs; 13-10-2008 at 08:34 PM.
#59
Steve
#61
PassionFord Post Whore!!
iTrader: (1)
Hello, my first post here!
I’m after more information on this inlet manifold. Other than being bloody expensive and used on stupidly powerful Cossys does anyone have any real information? After lots of asking around I’m still no closer to obtaining one. Infact, most people haven’t seen on in the flesh yet. What’s going on? Why are these hard to get? Please could you answer my following questions?
Are these still being made?
Who makes them?
Where do I buy one from?
Anyone trying to get shot of one?
Any help would be appreciated.
Cheers.
I’m after more information on this inlet manifold. Other than being bloody expensive and used on stupidly powerful Cossys does anyone have any real information? After lots of asking around I’m still no closer to obtaining one. Infact, most people haven’t seen on in the flesh yet. What’s going on? Why are these hard to get? Please could you answer my following questions?
Are these still being made?
Who makes them?
Where do I buy one from?
Anyone trying to get shot of one?
Any help would be appreciated.
Cheers.
#63
mounture roller barrel
..the MIS on its really good...on my wrc escort i have fit the Mountune Roller barrell,very responsive
Last edited by Oppliger Motorsport; 13-05-2010 at 10:11 AM.
#74
PassionFord Post Whore!!
#75
10K+ Poster!!
I noticed the RallyX Fiesta at Autosport was running one with some sort of Tibuc controller in the passenger footwell, the driver said it was something to do with boost control though, but then he didn't even know what ecu it ran
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
07-10-2015 12:56 PM
Johnny Knoxville
General Car Related Discussion.
4
30-09-2015 07:21 AM
caprixpack
General Car Related Discussion.
0
25-09-2015 07:53 PM