Overboost function
10-09-2008, 01:42 PM
#1
Part of the Furniture
Thread Starter
Join Date: Feb 2007
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Overboost function
Hi all
Can one of you help me out. My BT escos boost at 1,2 bar but without overboost.
My amal valve is the type with 2 connections on it. I can check the amal vavle by using 12 volt or? and how do i check if the ECU puts out the signal to the amal valve?
If i got i right the amal valve is the one that bleeds the air to the actuator during this overboost. Giving something like 0,2 bar in overboost
But when does the overboost kick in ? and what triggers it?
Hope you understand my problem.
Can one of you help me out. My BT escos boost at 1,2 bar but without overboost.
My amal valve is the type with 2 connections on it. I can check the amal vavle by using 12 volt or? and how do i check if the ECU puts out the signal to the amal valve?
If i got i right the amal valve is the one that bleeds the air to the actuator during this overboost. Giving something like 0,2 bar in overboost
But when does the overboost kick in ? and what triggers it?
Hope you understand my problem.
12-09-2008, 06:59 AM
#3
PassionFord Post Whore!!
Join Date: Sep 2003
Location: Macclesfield - you'll never leave....!
Posts: 4,519
Likes: 0
Received 1 Like
on
1 Post
the overboost feature allows it to run ( on a std car ) just under 1 bar for a few seconds in the mid range when coming on boost, it then tails off to the std boost of around 0.6 bar.
Thread
Thread Starter
Forum
Replies
Last Post
