The brakes have arrived!
15-02-2006, 04:38 PM
#1
Monte Geek
Thread Starter
Join Date: Jun 2003
Location: Cheshunt, Herts
Posts: 8,812
Likes: 0
Received 0 Likes
on
0 Posts
The brakes have arrived!
First lets get straight to the pics 
Massive thanks to Mike Rainbird@R&B Motorsport
Spec is 355mm Discs and 6-pot calipers and one off bells
Really chuffed to bits with the bells for a few reasons:-
1. Colour.. I opted for hard annodised and funny enough the colour is almost spot on to the OZ racing logos on the wheels.
2. The bells have a 15mm spacer built into them so I won't have to use spacers for the magnesium wheels which where ET33.. bringing the offset down to a much better ET18
3. I asked for a hubcentric locator ring to hold the wheels better which was done, but not only that Reyland didn't drill the hole out.. The reason I am chuffed with this is because my Mag wheels don't come with a center cap and I struggled to find one that would fit so decided against this and was going to paint the driveshafts nut so it didn't look rusty.. but now I don't need a cap as all your see is the bell (I hope that made sence)
Will take some better pics when I get home for my gallery thread
Massive thanks to Mike Rainbird@R&B Motorsport
Spec is 355mm Discs and 6-pot calipers and one off bells
Really chuffed to bits with the bells for a few reasons:-
1. Colour.. I opted for hard annodised and funny enough the colour is almost spot on to the OZ racing logos on the wheels.
2. The bells have a 15mm spacer built into them so I won't have to use spacers for the magnesium wheels which where ET33.. bringing the offset down to a much better ET18
3. I asked for a hubcentric locator ring to hold the wheels better which was done, but not only that Reyland didn't drill the hole out.. The reason I am chuffed with this is because my Mag wheels don't come with a center cap and I struggled to find one that would fit so decided against this and was going to paint the driveshafts nut so it didn't look rusty.. but now I don't need a cap as all your see is the bell
(I hope that made sence)Will take some better pics when I get home for my gallery thread
15-02-2006, 05:13 PM
#5
I've found that life I needed.. It's HERE!!
Join Date: Sep 2004
Location: Shepshed, Leics
Posts: 1,149
Likes: 0
Received 0 Likes
on
0 Posts
look spot on mate big up to the reyland lads those bells are a work of art... also sorting the same problem as what I have got --- spacers 
big up to the reyland lads those bells are a work of art... also sorting the same problem as what I have got --- spacers
15-02-2006, 05:39 PM
#6
PassionFord Post Troll
Join Date: Sep 2003
Location: next to pc
Posts: 2,596
Likes: 0
Received 0 Likes
on
0 Posts
nice work martin, lets hope you dont change your rims or crack one paul or it will be new bells time lol but nice to build the spacer in the bell and a bonus about the cap was going to do the same with my spacers untill i was told that the pcd was allso different on the spacer to match the rims so i was lucky or that could have cost me as it whould have been a big bit of alloy to start off with
was going to do the same with my spacers untill i was told that the pcd was allso different on the spacer to match the rims so i was lucky or that could have cost me as it whould have been a big bit of alloy to start off with
- Top job by Mike and Martin. 
Trending Topics
15-02-2006, 07:11 PM
#9
Monte Geek
Thread Starter
Join Date: Jun 2003
Location: Cheshunt, Herts
Posts: 8,812
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dunccoss
nice work martin, lets hope you dont change your rims or crack one Paul or it will be new bells time lol but nice to build the spacer in the bell and a bonus about the cap
I thought about the future of maybe changing wheels but as I'll be able to fit any Group-A wheel now and I'm sure it will be ok as all the Compomotive range are availible in GRP-A Pic of the wheel with the bell fitted so you can see the cap
15-02-2006, 09:59 PM
#15
Monte Geek
Thread Starter
Join Date: Jun 2003
Location: Cheshunt, Herts
Posts: 8,812
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by martin-reyland
glad you like them Paul
Gonna have to do the rear big disc conversion now so they match
16-02-2006, 10:55 AM
#20
PassionFord Post Whore!!
Join Date: May 2003
Location: SE
Posts: 9,226
Likes: 0
Received 0 Likes
on
0 Posts
I like the idea of incorporating the spacer into the bell, also the idea of the blank over the nut, though I still think they need something in the centre of the wheel maybe?
Thread
Thread Starter
Forum
Replies
Last Post