RS500Plenum/elbow/throttlebody/loom/level8/boardSOLD
Wahay!! Ive lost my Virginity!!
Originally Posted by RS500/104
Originally Posted by tgsday
I there any advantage over the P8 with the L8 and visa versa?
Sorry m8, you must be joking here. What is Stu at MSD doing then with Esc Cos and their P8 ECU's???? Right, live mapping.
Originally Posted by RS500/104
Originally Posted by tgsday
I there any advantage over the P8 with the L8 and visa versa?
i have personally live mapped a p8 equiped car with stu! 
Trending Topics
Any of the Pectel equipped ECU's cannot be live mapped in a true sense of the term IIRC.
All of the Weber (level 1, 6, 8 and P8) can be live mapped if not equipped with the Pectel boards.
All of the Weber (level 1, 6, 8 and P8) can be live mapped if not equipped with the Pectel boards.
Unless they have evolved, then from what I was told by an engine management mapping specialist, the ECU with Pectel equipment cannot be live mapped in the same sense as the origional ECUs'. The response is too slow in the way the Pectel board decodes the info from the chip into something the ECU understands IIRC what I was told.
They can be mapped but I don't profess to understand exactly how the Pectel board and ECUs' work so ask someone who knows I.E Stu @MSD, Tony @ TS etc..
They can be mapped but I don't profess to understand exactly how the Pectel board and ECUs' work so ask someone who knows I.E Stu @MSD, Tony @ TS etc..
Thread Starter
Wahay!! I've lost my Virginity!!
iTrader: (2)
Joined: Apr 2004
Posts: 83
Likes: 0
From: manchester
Re: RS500Plenum/elbow/throttlebody/loom/level8/board£1400
Originally Posted by cossie si
This is the genuine article.Full kit no bits to find .Includes polished plenum/elbow/t.body/rails chromed cable bracket.Level8 ecu with pectel board driver.(Ahmed chip) extra loom.Fuel pressure reg.Looks the business,gleaming.£1400 no offers.(Sorry comes without injectors)TEL07703269444upto 11 oclock
PassionFord Post Whore!!
Joined: Oct 2003
Posts: 4,775
Likes: 0
From: S/E Kent, Thanet
Thats far to cheap for this.
£1300 for inlet, and £500 for ecu, is wot you should be askin.
Was gonna sell my set up but only if i get wot i want. as it stands me in alot more.
Edited cos read different to wot i meant.
Try sellin else where, ebay etc etc
£1300 for inlet, and £500 for ecu, is wot you should be askin.
Was gonna sell my set up but only if i get wot i want. as it stands me in alot more.
Edited cos read different to wot i meant.
Try sellin else where, ebay etc etc
I've found that life I needed.. It's HERE!!
iTrader: (4)
Joined: May 2004
Posts: 1,352
Likes: 5
From: leics
Originally Posted by fiesta cossie
Thats far to cheap for this.
was gonna sell my set up but only if i get wot i want.
£1300 for inlet, and £500 for ecu, is wot you should be askin.
was gonna sell my set up but only if i get wot i want.
£1300 for inlet, and £500 for ecu, is wot you should be askin.
been forsale for roughly 6 weeks now? at a more than good price but not sold yet you're saying he should be selling it for a extra 400 quid?!
time of year isn't good to sell anything really!
PassionFord Post Whore!!
Joined: Oct 2003
Posts: 4,775
Likes: 0
From: S/E Kent, Thanet
i paid £1500 for the inlet complete, and £700 for p8 super 8 with sub loom. and it took me months to find them. were goin for alot more at that time, even upto £2000 for inlet.
Its most be down to the time of year, or no one really wants them at the mo.
If he was a Trader then he would sell them easy, at top price, evan now.
Its most be down to the time of year, or no one really wants them at the mo.
If he was a Trader then he would sell them easy, at top price, evan now.
