Oppliger
Thread Starter
Wahay!! I've lost my Virginity!!
Joined: Oct 2009
Posts: 94
Likes: 0
From: spain
Oppliger
hi, guys.
I am writing Romain Oppliger to email ana Facebook acount for buying and he is not answering.
does anyone know if it is normal?
I am super tin-plating
Thanks for all
I am writing Romain Oppliger to email ana Facebook acount for buying and he is not answering.
does anyone know if it is normal?
I am super tin-plating
Thanks for all
10K+ Poster!!
Joined: Mar 2013
Posts: 10,837
Likes: 1,033
From: Guildford
I think when he is racing or has a lot on he can be slow to respond.
try oppligerm@live.com and oppliger.cosworth@Tiscali.it as email addresses.
try oppligerm@live.com and oppliger.cosworth@Tiscali.it as email addresses.
PassionFord Regular
Joined: Jun 2003
Posts: 426
Likes: 12
From: Belgium
Think twice before buying.
Thread Starter
Wahay!! I've lost my Virginity!!
Joined: Oct 2009
Posts: 94
Likes: 0
From: spain
I do not understand how it works that way, is not the first time it happens to me
my patience has limits.
I am going to give you 2 days to answer and i will go to another salesman.
So long it is ridiculous and respond to sell
Thank you guys
I will tell you
my patience has limits.
I am going to give you 2 days to answer and i will go to another salesman.
So long it is ridiculous and respond to sell
Thank you guys
I will tell you
Trending Topics
Thread Starter
Wahay!! I've lost my Virginity!!
Joined: Oct 2009
Posts: 94
Likes: 0
From: spain
This post is very bad for him, but I have seen him hooked up on Facebook, it turns on the computer.
But I see I am not the only person who does not take care of. The lord side as it works.
But I see I am not the only person who does not take care of. The lord side as it works.
15000
Joined: Jun 2015
Posts: 31
Likes: 5
From: Brione (BS)
10K+ Poster!!
Joined: Mar 2013
Posts: 10,837
Likes: 1,033
From: Guildford
Romain, I wouldn't worry too much as you cannot please all of the people all of the time. It looks like you could have managed Barts expectations better perhaps and maybe have taken a while to respond but it also looks like you are employing someone to solve the issue.
I have had some immediate and very well explained email responses from you and others have taken a while. Jay often says how good your service is.
I have had some immediate and very well explained email responses from you and others have taken a while. Jay often says how good your service is.
PassionFord Regular
Joined: Jun 2003
Posts: 426
Likes: 12
From: Belgium
hello,
since last year i had myself to stay in the workshop so i loose a bit the control of emails and calls,i check emails few minutes a day.
ALL THIS WILL CHANGE NEXT MONTH, WE WILL HAVE AN EXTRA PERSONS THAT WILL SPEAK FLUENT ENGLISH,GERMAN,RUSSIAN,ITALIAN.
regarding Bart Van Duen post its not correct,i have always replied him...ok with time...but always replied and the last email he sent was the 3/06....then its right 3 months ago he ordered a ported head from us where we was boring inlet section on cnc and finish the inlets port and the full exhaust seciton by hand for 550 euro (396Ł) + the rebuild cost 550 euro.during the time we started developing a full cad CNC program to make the entire porting work by CNC,that took 1 month for the cad work,than we have done 5 jigs to fit the heads on the cnc,made special tools.last week we have start productions AND I OFFERED BART TO DO THE JOB WITHOUT EXTRA COST
I DONT THINK IS CORRECT ACT IN THAT WAY
Cheers
Romain
since last year i had myself to stay in the workshop so i loose a bit the control of emails and calls,i check emails few minutes a day.
ALL THIS WILL CHANGE NEXT MONTH, WE WILL HAVE AN EXTRA PERSONS THAT WILL SPEAK FLUENT ENGLISH,GERMAN,RUSSIAN,ITALIAN.
regarding Bart Van Duen post its not correct,i have always replied him...ok with time...but always replied and the last email he sent was the 3/06....then its right 3 months ago he ordered a ported head from us where we was boring inlet section on cnc and finish the inlets port and the full exhaust seciton by hand for 550 euro (396Ł) + the rebuild cost 550 euro.during the time we started developing a full cad CNC program to make the entire porting work by CNC,that took 1 month for the cad work,than we have done 5 jigs to fit the heads on the cnc,made special tools.last week we have start productions AND I OFFERED BART TO DO THE JOB WITHOUT EXTRA COST
I DONT THINK IS CORRECT ACT IN THAT WAY
Cheers
Romain
sad we have to come to here to get this arranged.
Thread Starter
Wahay!! I've lost my Virginity!!
Joined: Oct 2009
Posts: 94
Likes: 0
From: spain
good morning, girls
I have not been able to buy spares need for my gear box.
I am amazed the way to work that i have this person
that is easy to price to pay and sending
it is amazing to cry
he will look with my dream
I have not been able to buy spares need for my gear box.
I am amazed the way to work that i have this person
that is easy to price to pay and sending
it is amazing to cry
he will look with my dream
Thread
Thread Starter
Forum
Replies
Last Post
SHaDoWLanDZ
Restorations, Rebuilds & Projects.
34
Jun 9, 2015 10:15 PM
Oppliger Motorsport
Pictures, video & Photoshop Forum
6
Oct 18, 2013 07:25 PM