Subaru EJ20 CDB bottom end
Thread Starter
Too many posts.. I need a life!!
iTrader: (1)
Joined: Nov 2008
Posts: 813
Likes: 8
From: Perthshire, Scotland
Subaru EJ20 CDB bottom end
I have my spare closed deck block bottom end for sale.
This was removed from a 95' RA, was stripped and reassembled as a spare.
Had acl race series bearings fitted. crank on std grind. pistons std size. new oil seals gaskets etc.
This can have a set of heads fitted, or used as the basis for a big bhp build.
£450 ono plus postage. or can collect from near perth,central scotland.
Fraser
This was removed from a 95' RA, was stripped and reassembled as a spare.
Had acl race series bearings fitted. crank on std grind. pistons std size. new oil seals gaskets etc.
This can have a set of heads fitted, or used as the basis for a big bhp build.
£450 ono plus postage. or can collect from near perth,central scotland.
Fraser
Thread Starter
Too many posts.. I need a life!!
iTrader: (1)
Joined: Nov 2008
Posts: 813
Likes: 8
From: Perthshire, Scotland
No, not new. After stripping,
the block was cleaned up
Pistons, rods, crank checked
Reassembled with new ACL race bearings, new crank seal etc
and hasnt been ran since.
But no, its not a 'new build' per say.
It is however the ideal basis for a forged big bhp build using the cdb & sell off the orig crank rods pistons etc.
Hope this answers your question.
Thanks
the block was cleaned up
Pistons, rods, crank checked
Reassembled with new ACL race bearings, new crank seal etc
and hasnt been ran since.
But no, its not a 'new build' per say.
It is however the ideal basis for a forged big bhp build using the cdb & sell off the orig crank rods pistons etc.
Hope this answers your question.
Thanks
Last edited by Fezman1; Nov 2, 2014 at 02:50 PM.
Thread
Thread Starter
Forum
Replies
Last Post
SMILER258
Restorations, Rebuilds & Projects.
36
Sep 28, 2015 09:04 AM
DavidK
Ford Sierra/Sapphire/RS500 Cosworth
1
Sep 27, 2015 02:55 PM