Bara 240nM 7.5" 3.9 Ratio Diff ***SOLD***
Thread Starter
Joined: May 2004
Posts: 5,641
Likes: 33
From: Solihull near Birmingham
Bara 240nM 7.5" 3.9 Ratio Diff ***SOLD***
Completely rebuilt less than 1000 miles ago.
Has the Bara uprated 240nM VC and forged planet and sun gears with a 3.9 CWP that was shot penned/super finished, with all new bearings and seals.
Also comes with 12 driveshaft bolts which I bought when fitting the diff that cost me £48
and all the other mounting bolts which were purchased new at the time which are hign tensile zinc plated items.
This unit has been well proven to handle big power as I ran it in my 3 Door with 590bhp and 578ft/lb of torque giving it jonny big balls 7 grand launches on 888's without blowing it up.
Any inspection welcome.
I'll get some photos of it up tomorrow (20/07/13) but it looks like most 7.5" Diffs from the outside
£800
Here's a couple of video to show you how well it holds up with 590 bhp and 578 ft/lb of torque running through 235 width R888's and a 6 degree beam:
Rich
Has the Bara uprated 240nM VC and forged planet and sun gears with a 3.9 CWP that was shot penned/super finished, with all new bearings and seals.
Also comes with 12 driveshaft bolts which I bought when fitting the diff that cost me £48
and all the other mounting bolts which were purchased new at the time which are hign tensile zinc plated items.This unit has been well proven to handle big power as I ran it in my 3 Door with 590bhp and 578ft/lb of torque giving it jonny big balls 7 grand launches on 888's without blowing it up.
Any inspection welcome.
I'll get some photos of it up tomorrow (20/07/13) but it looks like most 7.5" Diffs from the outside
£800
Here's a couple of video to show you how well it holds up with 590 bhp and 578 ft/lb of torque running through 235 width R888's and a 6 degree beam:
Rich
Last edited by Sonic Boom; Apr 30, 2014 at 08:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post
DavidK
Ford Sierra/Sapphire/RS500 Cosworth
1
Sep 27, 2015 02:55 PM