Hi there, I've got a mk6 rs2000 with a tubular exhaust manifold. It's been bolted together on the downpipe section by the previous owner but I think it should have springs to allow for flex. I wanted to know if my thoughts are correct and if possible if anyone knows of somewhere I'd be able to get some, any info would be great. Thanks, Robert

 

not seen flexi bolts on a rs2k only on zetecs like normal 1.6/1,8s as normally the manifold and downpipe are one piece on the rs2k

 

Thanks, probably best to see if zerec ones similar and go from there. Thanks again

 

There were no springs anywhere on my RS 2000

 

Is it an aftermarket manifold?

 

Are you talking about a flexy pipe on the end of the manifold?