I have someone interested in the full motor but if it falls through I am going to be splitting my engine so all parts should be available from next week if it doesnt go complete.

Please note Im not going to dismantle the engine till I have definate names against the major parts (head, block, turbo) with a 10% deposit












Bottom end stuff......

Fresh bored 200 block with brand new (0.5) Wiseco standard comp pocketed pistons & new rings, standard rods with brand new little ends fitted. £1200

Standard/standard crank £450 - Moanstone Steve

Brand new oil pump fitted with high pressure spring kit (spray bar not included) £50

2wd sump £50 - PROV SOLD

RS 500 style alternator drop bracket £40

2wd water pump £20

Engine mount arms £20

Power steering pump £30


Top end stuff.......

CNC'd 4x4cylinder head by Rick Woods Racing.
Ported, polished and gas flowed with 3 angle valve seats. 27.1mm inlet ports and 25.4mm exhaust ports. Reyland uprated valve springs. INA lifters. £1600


Reyland BD16 inlet cam £100 - Fezzajsy

Reyland BD14 exhaust cam £100 - Fezzajsy

Cam pulleys £100

Swedish style inlet £120 - MR C
2wd fuel rail £50

Genuine T4 turbo in very good condition, no excessive play in shaft. £850

All parts are priced + postage. Larger items would be preferred collected in person or if you wish to arrange your own courier I can pallet up for you no problem.

*Note* All parts are sold on a first come first served basis, in the current economic climate money talks Im afraid.

 

2wd flywheel mate ??

 

I'll have the Swedish Plenum and throttle cable bracket please mate. PM me paypal or bank details regards Mark

 

Do u have a clutch

 

how much for both cams posted mate?

 

PM's replied to.

Ginner, no clutch mate sorry.

Tony, I cant put my hand on it but it'll be in the garage somewhere. Dunno what one is worth??

Fezzajsy you have PM

 

How much for rocker cover if ur selling it

 

Random question, but if I had a 205 block, could I take everything off that block and bolt straight onto a 200 block?

 

Pm'ed you m8

Steve

 

Keeping hold of cam cover for Helens car Lee sorry.

Booner, yes mate.

Steve, replied fella

 

Thanks mate. Hopefully I wont have too but nice to know I can. This would be a good selling point as well to mention for anyone running a 205 block and want the added security of the 200?

GLWTS

 

You got any brakes? I have a mahoosive set and want to go back to 17" wheels and want a decent brake kit to replace the monsters on mine

 

You back in a Ford like Mark? Ive got the 6 pot Wilwoods I put on LBT but not much of a clue what they are worth 2nd hand. Ive got the bill for £1250 for them when I got them. They are rusty from being sat for so long but they'll clean up with a few miles driving or a very light skim.

 

send us a pm and will they fit under 17's? Yeah bought a black 3 door its got 18" comps on and massive aston brakes on it at the min but like i said i want to go back to 17" wheels cause it dont drive to good tbh

 

if you've still got the turbo in a months time ill have it off you, just havent got the money atm

 

I need one mate so please let me know not to sure what its worth need it ASAP
Thanks
Tony

 

Mark you must be who my mate Pete (Spannermonkeys) was talking about the other day. He said he knew someone with a 3dr with Aston brakes on that wanted rid of em. Yeah mine fit under 17's, there will be a pic of em on the car in my resto thread somewhere pal.


Tony Ill have a dig about in the garage for you pal. Are you going 2wd??

 

Yeah maybe or could have been the lad i got it off.

I cant see any pics cause i'm at work and photobucket must be blocked as all i get is red x's. I can remember them from when it was down jacko's i think.
Let us know how much you want for them and i'll see but tbh i dont really want to spend a fortune and would put up with the 18s if it was going to cost a fortune to swap over. Suppose it depends how much i could get for me 18 inch comps and brakes dont it

 

Ok thanks mate , yeah going 2wd !

 

is the t4 still for sale?

 

if oil pump is 4x4 ill have it please and if it is new thanks

 

Is this still available.....interested in the bottom end...

PM'd

 

Whats happening m8, as I said I need a crank asap so my build can get done, let me know m8.

Steve

 

Hi mate can you go lower on the head.

 

Did the Plenum sell??

If not i will have it

 

waiting on pics of oil pump