right, starting this tonight, but will add more every day as i clear out my garage!

Cossie bits:



cossie scrap head, not worth rescuing ever. ideal ornament or on a mock engine £20



crank sensor and mounting bracket £15
standard cossie 'KA' pulleys £5 each SOLD
4 Cossie 4wd pistons, std size £30
2wd alternator bracket £10
2wd PAS bracket £10
4wd header tank, some cracks as usual £10 SOLD
front main oil seal housing, £20
2x front dizzy shaft oil seal housing £10 each



koni rear shocks, need rebuild £15 the pair
dizzy shaft £10
kidney box £10 SOLD
coil £5
cambelt tensioners £10 each
cambelt tensioner nut £5
sapphire cossie bumper brackers, brand new! £offers SOLD!



3 bar map sensor, broken but repaired, ideal as spare £20
4wd clutch arm and pivot £20
4wd release bearing £10
water pipe from pump to matrix (i believe its from a 2wd) £5 SOLD
2wd gear lever, will be welded together and stronger than standard £20
throttle cable bracket £5
crank pulley bolt £5
dizzy shaft £10
group a coil £15 SOLD
breather thingy as pictured £5 SOLD


2 Cossie 4wd Front calipers, £50



4wd gearbox, less the front casing (it was used on a 2wd mt75) £80

sapphire cosworth side skirt rear halves only. £5 each

other ford bits:
(soon for sale) Zetec turbo blacktop block with vauxhall pistons and balanced st170 crank, was going to use this in my car, but have had a change of direction. has a spigot bearing in for RWD application if needed. not yet run. £400

(soon for sale) Zetec head with 1mm oversize inlet and 3mm oversize exhaust valves. 3 angle seats. ported and polished by the same place that did speckys tigra head up until last year £400

(soon for sale) Ported CVH EFi head, bronze guide sleeves, 3 angle seats, stainless valves, double springs, done by same place £250




Adjustable TCA's for mk4 escort, one slightly bent, but probably repairable. £15
Mfi xr3i Pipercross air filter, £10
efi k&n (not sure its the official one, but was fitted to an efi '3i), £10
'D' shape steering wheel, £15



Orion RS overbumper! rear only, a bit of a mess, but someone could rescue it! rare these days £20



2wd rear ARB £10
Snap on impact gun, £60





sideskirt clips, brand new. 3 short, 1 medium and 8 long available. £5.00 each

 

lots more added 17/4

 

17/5 even, i seem to have lost a month!

 

Send a PM to Graham C about the pistons, I know he was after a set but not sure on which size

 

would it be possible to ship some small parts to Belgium?

 

if possible, i am interested in;
kidney box £10
water pipe from pump to matrix (i believe its from a 2wd) £5
breather thingy as pictured £5
cambelt tensioner nut £5
auxiliary shaft pulley, (only the pulley)
Cheers, Andy.

 

Water pipe,header tank and gpa coil please , postage to cork,Ireland....

 

pics please sapphire cossie bumper brackets,

First call if selling do you Have PICS of the above

 

pm sent

 

S2 builder

Better to start a new post instead of editing as it appears you were ahead of me for water pipe whereas I asked for it first....

Cheers

 

Sorry, I meant a new reply

 

oh, ok sorry Rob, you where first indeed! cheers

 

will find out the postage and let you know asap!

same as above, will hopefully get them to the post office to price up tomorrow or first thing Saturday

they are pictured above sitting on the end of the konis. let me know if you'd like a clearer picture though. i am selling them, just not sure what they're worth! make me a sensible offer


replied

 

ok! thanks!!! cheers, Andy

 

They look like Esc cos bumper brackets not Saff ones as they are a big kinda rectangle ish shape

 

they look similar to the ones on my sapphire bumper, plus they have an 87 part number, so I think they're sapphire ones.

 

hello payment sent for sapphire cossie bumper brackets cheers andy

 

Would you sell the spigot bearing for the rwd application. and how much?????

 

updated and more added!

 

afraid not, you can still buy these mega cheap new anyway.

 

4 Cossie 4wd pistons, std size £30

Are fine? Total amount with shipping costs to Spain?

 

How much for the RS Orion accessory apron posted to RH15 mate??

 

Have you got a good petrol tank? If so how much posted?

 

how much is the postage on the pistons?

 

its a v6 gearbox that mate, got the long input shaft

 

I have sent you a pm mate

 

are fine as far as i know, will have a measure before i take payment for them though will get you a postage price tomorrow


i really have no idea its bloody huge! not really sure how i'd package it either without it getting damaged on its way any ideas?

afraid not sorry

gotta offer them to rozvor first, but will let you know if that falls through

correct! nothing a hacksaw wouldn't sort though

replied