just wondered what boost they run for a T34.48 and greens?

think im actuator's knackered so dont know what to replace it with.

cheers, pete

 

I mate.i run a msd stage 3 on my motor.im on 55lbs and a 63 housing and boost is at 30psi and tails off to 23-26 psi.cant fault it

 

What Actuator are you running Pete, -31 or -34??

 

-34 Actuator is better for the smaller T34 Turbos Pete

 

I ran 2 bar when my saph was running that spec.

 

jus had mine done stu and james did it for me boost is set at 22psi

 

i have no idea!! lol

there's nothing written on it or a sticker, so was just going to buy a new one.

all i can tell you there's a 'evolution' chip the L6, it's running greens and a T34.48 all from my own observations, also have a rolling road print out for 340bhpish from a while ago.

 

Pete, that sounds pretty spot-on that power for that setup and boost, if you are going to but a new Actuator go -34, try Woodford Garage online Pete, good proce or Burton Power..

 

cheers staffi, came up trumps again! so think it'll b running 22ish?

im obv going to get it set up when it's mot'd, just worried about the emissions.

 

MSD do -34 actuators m8.

 

Mine spikes at 1,9 bar with that setup

 

I think the manual that came with the chip says 1.8bar peak.

 

mines peaking 1.8