Chromed Rocker cover. I believe it has the mounts on top for the efi charge carriers. Check pictures.£35 posted.
Blue Samco boost hose with neck for dump valve. Blue but has faded with age and is quite dark. £15 posted
Recently re-built standard LSD box. Was on the car when I bought it but I have bought a CTS box. I was told it had done less that 2000 miles and was still bedding in. It seemd ok but I broke down on the way home so I have very little experience with it and no proof of re-build. Taking this into consideration £120.
Dash board. £20 (would have to check postage)
Centre consol. £15 posted
Silver painted S2 gearbox cradle. Paint flaked off in places, looks like it used to be orange £20 posted
Standard gearbox mount £10 posted
Handbrake plastic cover (bit that attaches to centre console). £10 posted
Proffesionaly made (not home built) Stealth shelf with holes underneath for 6x9's. £25 would have to check postage.
Glove box with door. £12 posted
Boot quarter panels. £13 posted
Rear bench including backrest. £25 (would have to check on postage.)
Carpet. Good condition. £20 (would need to check on postage)
Rear pillar interior plastics. £15 posted.
Gear stick gaitor. £5 posted
Take a look at the pictures below and pm me with interest and please use the thread so that I can fairly see who saw stuff first. With the bigger stuff I don't mind meeting people half way providing it's no more than around a hundred miles.
I've had interest in some of these bits already but most people have sort of faded away. Thanks for looking.

 

Hi mate how old are the gearbox mounts (uprated)! Rubber good?!

 

They look ok to me pal. I don't know how old they are. They were on the new box I bought but I already have a set and don't really need them. They may be spoken for though so I'll have to PM you if they don't go.

 

I will take decent offers on some of the bigger stuff (ie the stg 3 head) but nothing silly please.

 

Hi mate what Newman cam is in the head??

 

I really don't know to be honest. The stamp reads SX428T. It doesn't seem like a particularly lary cam as the car idled nicely. The car boosted nicely from really low down the rev range. It's my first experience of a Newman Cams camshaft but I was quite pleased with it and they appear to get good write ups. I did consider putting this head onto my new engine but the thought of spending another £80 for a Burton gasket put me off.

 

Ok I'll have a look on there web site,you got recepits for work on the head??

 

I'm afraid not. The previous owner built it. The porting and valve springs you can blatently see. Interestingly I've just done a google search on the camshaft stamp and it came up £210 from power engineering. Maybe not a Newman Cams camshaft. Do power engineering make their own camshafts?

 

Yeah they did but not sure if they still do! quality cams from what ive heard!

 

I should imagine they're quite good from a firm like Power Engineering. The car certainly had good power delivery. I'd better edit the thread.

 

Payment sent

Cheers

 

Fuel computer now sold.

 

Standard head and flywheel provisionaly sold.

 

hi mate i will have the door cards off you pm how you want paying and i will send you my address cheers paul.

 

You have pm mate

 

Flywheel and standard head gone. Come on, someone buy this gearbox and stage 3 head. I need new brakes and stuff lol.

 

I've lowered the head to £175. That's got to be the best priced stage 3 with this build.

 

Have you had / heard this head running mate? How long have you had it ?

Regards Jay

 

Yes mate I drove with it. Was on the car when I bought it 2.1 ZVH. I'm only selling cos I've bought a low comp short block burton engine. Was gonna keep it as a spare but I need a bit of cash to keep my project going. It barely tapped at all tbh. It's been out of the car for around a month. I really think it's bloody good and worth way more than it's up for but needs must lol.

 

You had the computer through yet?

 

Hi mate pm me payment details for rocker cover cheers

 

Standard cover thanks

 

PM'd

 

Payment sent cheers mate

 

Not yet fella.

 

I'll have the stage 3 head off you.
Postcode is KY3 9HP.
Paisleyfreight might be good option for shipping.
Let me know when you have total and how you want
paying.


Cheers Simon

 

PM'd mate.

 

Stage 3 head and standard rocker cover gone now.

 

hello mate ill have the header tank if it hasnt gone yet?! cheers

 

Someone is interested at the moment. I'll get back to you if it doesn't develop mate.

 

no worries fella let me know if it dont go! cheers

 

Hi mate you got the heater matrix

 

Arrived this morning mate well impressed. Top service

Cheers

 

Good. Hope it works mate. I've never seen one that does mind lol.

 

Any chance of an offer on the gearbox with the vibratec mounts, including putting it on a pallet?

 

You have pm pal.