After Fire at ford fair, start to rebiuld! It Lives again.!!!!
Thread Starter
Too many posts.. I need a life!!
iTrader: (10)
Joined: Jun 2003
Posts: 740
Likes: 1
From: Aylesbury, Bucks
Well after the fire on track at Ford Fair, its time to pull it down and get it rebiult





There is loads to do, it has even melted the heater box and matrix inside!!





There is loads to do, it has even melted the heater box and matrix inside!!
Last edited by FlashRS; Dec 12, 2010 at 03:34 PM. Reason: update
Trending Topics
Thread Starter
Too many posts.. I need a life!!
iTrader: (10)
Joined: Jun 2003
Posts: 740
Likes: 1
From: Aylesbury, Bucks
Cheers, my bro-in-laws burns are gettin better, his hand and arm was the worst!
Turned out that the head of the front fuel rail bolt sheered off, letting the rail move out and the o ring blew out!!
I have got a long way to go, I have a parts list as long as my arm!
It even melted the clutch cable quadrant on the pedal box.
Worst bit is havin to put a car loom in it.
Turned out that the head of the front fuel rail bolt sheered off, letting the rail move out and the o ring blew out!!
I have got a long way to go, I have a parts list as long as my arm!
It even melted the clutch cable quadrant on the pedal box.
Worst bit is havin to put a car loom in it.
aka Turbosailorboy
iTrader: (5)
Joined: Apr 2005
Posts: 6,527
Likes: 21
From: Under the water.... .......in a nuclear submarine
Good luck with the rebuild

Had the fuel rail bracket snap on my billet rail just before Ford Fair

So lucky my friend spotted it when we were checking oil/water.

Had the fuel rail bracket snap on my billet rail just before Ford Fair

So lucky my friend spotted it when we were checking oil/water.
Glad to hear you boys are on the mend, arms take longer to rebuild than cars! You are very lucky. Fitting a lifeline system once its rebuilt? I know i am after seeing this. Good luck boys
Fair play to you for just getting on with it straight away. I'd stil be crying and not knowing where to start. Hope you and your brother have a speedy recovery to.
Cheers, my bro-in-laws burns are gettin better, his hand and arm was the worst!
Turned out that the head of the front fuel rail bolt sheered off, letting the rail move out and the o ring blew out!!
I have got a long way to go, I have a parts list as long as my arm!
It even melted the clutch cable quadrant on the pedal box.
Worst bit is havin to put a car loom in it.
Turned out that the head of the front fuel rail bolt sheered off, letting the rail move out and the o ring blew out!!
I have got a long way to go, I have a parts list as long as my arm!
It even melted the clutch cable quadrant on the pedal box.
Worst bit is havin to put a car loom in it.
thats exactly what happened to the stu's westie,
what fuel rail do you have?
good to see it's being restored
Thread Starter
Too many posts.. I need a life!!
iTrader: (10)
Joined: Jun 2003
Posts: 740
Likes: 1
From: Aylesbury, Bucks
Well it was a big today, bein rebiulding after tha fire, got her runnin today!! No water in it yet or boost hoses on but I just wanted to start it. Lots and lots still to do, its had a full rewire, new dash, heater , the list is endless. Gone for a swedish plen now, reyland fuel rail, FES regulator, all on -6 now, polished TB and modded for ALS.
Just got to push on and finish it now! Cheers
[got to tidy everything, wasted spark HT leads etc ]
http://smg.photobucket.com/albums/10...t=11102010.mp4
[
Just got to push on and finish it now! Cheers
[got to tidy everything, wasted spark HT leads etc ]
http://smg.photobucket.com/albums/10...t=11102010.mp4
[
Thread Starter
Too many posts.. I need a life!!
iTrader: (10)
Joined: Jun 2003
Posts: 740
Likes: 1
From: Aylesbury, Bucks







