After Fire at ford fair, start to rebiuld! It Lives again.!!!!
15-08-2010, 07:44 PM
#1
After Fire at ford fair, start to rebiuld! It Lives again.!!!!
Well after the fire on track at Ford Fair, its time to pull it down and get it rebiult
There is loads to do, it has even melted the heater box and matrix inside!!
There is loads to do, it has even melted the heater box and matrix inside!!
Last edited by FlashRS; 12-12-2010 at 03:34 PM. Reason: update
good to see it's being rebuilt, bigger and better I hope? 
15-08-2010, 08:50 PM
#10
Cheers, my bro-in-laws burns are gettin better, his hand and arm was the worst!
Turned out that the head of the front fuel rail bolt sheered off, letting the rail move out and the o ring blew out!!
I have got a long way to go, I have a parts list as long as my arm!
It even melted the clutch cable quadrant on the pedal box.
Worst bit is havin to put a car loom in it.
Turned out that the head of the front fuel rail bolt sheered off, letting the rail move out and the o ring blew out!!
I have got a long way to go, I have a parts list as long as my arm!
It even melted the clutch cable quadrant on the pedal box.
Worst bit is havin to put a car loom in it.
16-08-2010, 06:17 PM
#18
10K+ Poster!!
Nice to see your going to rebuild it, good luck with it.
17-08-2010, 08:47 AM
#23
Too many posts.. I need a life!!
iTrader: (2)
Join Date: Nov 2007
Posts: 617
Likes: 0
Received 0 Likes
on
0 Posts
Glad to hear you boys are on the mend, arms take longer to rebuild than cars! You are very lucky. Fitting a lifeline system once its rebuilt? I know i am after seeing this. Good luck boys
17-08-2010, 08:57 AM
#24
PassionFord Post Whore!!
iTrader: (3)
Join Date: Jun 2003
Location: Maldon, Essex!
Posts: 4,186
Likes: 0
Received 0 Likes
on
0 Posts
Fair play to you for just getting on with it straight away. I'd stil be crying and not knowing where to start. Hope you and your brother have a speedy recovery to.
17-08-2010, 10:25 AM
#25
Professional Waffler
iTrader: (1)
Join Date: May 2003
Location: Cardiff
Posts: 26,931
Likes: 0
Received 0 Likes
on
0 Posts
Cheers, my bro-in-laws burns are gettin better, his hand and arm was the worst!
Turned out that the head of the front fuel rail bolt sheered off, letting the rail move out and the o ring blew out!!
I have got a long way to go, I have a parts list as long as my arm!
It even melted the clutch cable quadrant on the pedal box.
Worst bit is havin to put a car loom in it.
Turned out that the head of the front fuel rail bolt sheered off, letting the rail move out and the o ring blew out!!
I have got a long way to go, I have a parts list as long as my arm!
It even melted the clutch cable quadrant on the pedal box.
Worst bit is havin to put a car loom in it.
thats exactly what happened to the stu's westie,
what fuel rail do you have?
good to see it's being restored
11-10-2010, 08:25 PM
#36
The rebiuld continues!!
Well it was a big today, bein rebiulding after tha fire, got her runnin today!! No water in it yet or boost hoses on but I just wanted to start it. Lots and lots still to do, its had a full rewire, new dash, heater , the list is endless. Gone for a swedish plen now, reyland fuel rail, FES regulator, all on -6 now, polished TB and modded for ALS.
Just got to push on and finish it now! Cheers
[got to tidy everything, wasted spark HT leads etc ]
http://smg.photobucket.com/albums/10...t=11102010.mp4
[
Just got to push on and finish it now! Cheers
[got to tidy everything, wasted spark HT leads etc ]
http://smg.photobucket.com/albums/10...t=11102010.mp4
[
