Hallo!

As some user here remenber i got this issue at this thread!

https://passionford.com/forum/genera...ons-co-uk.html

SO my question is, when i got hands in the engine and my parts, where can i leave my engine to have a perfect uptrate, including ST2 gearbox quaife diff?

I need some trusted opinions from Companies who had dealed, and got a perfect and serious job...

got these for example...

ap-tuning.co.uk
mtechautomotive.co.uk
specialisedengines.co.uk
vulcanengines.com
motorsport-developments.co.uk
powerengineering.co.uk

What´s the diference of this companies? the same or we can diferencce them?

GET ME A HELP HERE!

I NEED SERIOUS WORK HERE



ps:i hope i can get my engine

 

stay away from Specialised engines..

 

stick to the proper rs turbo specials mate vulcan only build engines they wont fit or tune it for you..

mtechautomotive ive never heard of a good rst with their name on it....

msd are realy good but do more cosworths than rs turbos

dont go near torque of the devil as ive had two rs turbos tuned by the tuner there and both have been shockingly shit

so my advise is to speak to the people at the following companys to see what they can do for you mate

ap tuning ..... build some serious rs turbos in their time

power engineering been building them for years and the good tuner is back (ian ball)

and even google oddkidd creations as there is some very nice cars done by this company...

and theres always jamsport as they have build some fine rs turbos

and try www.norrismotorsport.co.uk and check out the engine tuning section rs turbo stages 1-7 350bhp+ fastest in the country

and you will be in good hands

 

as above,in no particular order
APT
oddkidd creations
NMS
jamsport
these are just a few of the good ones

 

thx for all the reply! i know start looking for the new ones

 

at this point i do need to go to Doncaster, so motorsport D is the first on my list i and i do know there is the place with serious work!

I´m liking the OddKidd... but it´s too far!

Someone in doncaster here?

 

all of the tuners are abit far from you, but i seriously hope you get the problem sorted, someone from doncaster needs to see these guys for you

 

motorsport devolepments are a well trusted company so you will be in good hands

 

If you want to use decent engine builders around doncaster or near the i would use norris motorsport in derbyshire or motorsport developments or very close to doncaster area six motorsport . Ian deals with zetec turbos but he invented the zvh and has done cvh turbos as well so he could help you out and he is a very honest and helpful guy . I tried to get in contact through ebay about power conversions but had no joy and have not seen him advertising on ebay for a while

hope this helps

cheers paul

 

oddkid creations. top service

 

Stu @ MSD Run's this Forum too

 

Bit of a long way to come for a tune up mate? Portugal right??? Heard good stuff about Jamsport, MSD, Oddkidd etcect i was really happy with the service i got at torque of the devil, take your pick really.

Rob,

 

yes! but i´m not desapointed at this moment! i still can make the diferebbce here


someone got moore news? new updates?

thx this efford

 

x2

 

It's funny i'm in Portugal right now (Albufeira), should of brought my tools! lol

 

yeah your girlfriend would love that......

 

hmmm... good point!.... I could just leave her at the bar with my wallet, sorted!! lol

 

Hi ppl

So just to update this thread!

i´ve been at England since day 30 May, so at this point i´ve been at norris, jamsport, and i got a doubt...

My car is very Mint and tidy car, so should i go to 1.8 ZETEC? or stick at my CVH with EFI???

Max power i want is 220 bhp, the max! in my island, i would like moore torque than BHP

So i leave this questions to some of you that understand my doubts

Imagine... with some money in the pocket, what i should put to make it reliable, very reliable ??

cheers, and thx for all the help

 

i told you mate go and see ian howell , he has custom forged pistons and rods made for every engine made by cp pistons which are one of the best on the market , he also does big valve heads , custom inlets , tubular exhaust manifolds , pectel management all you need , now this bloke works from home in his garage as he has a full time job but he is honest as they come and what he dont know about cvh and zetec engines aint worth knowing. go and see him and he will sort you out and show you some stuff . to get 220 bhp wont take much to be honest how much are you looking to spend ?

cheers paul

 

If you have been to NMS and Jamsport then you do not need to ask on here whats best! lol
Zetec or CVH is up to you and what you like, both can be just as reliable if a well built engine is put in with good EFI management

 

Ok! at this point the engine is at Jamsport.

I´ve been very happy with their simpathy, and their professional work!

inlcuiding Jamie Impressive stuff they do there!