I thought i would start a thread on my car and the progress i am making with it or the lack of lol. Anyway the car was bought by my friend a few years ago as a non runner, he got it up and running and was using it as a road car, i bought the car off him and have started turning it back into a track specific car as thats all its good for really and the odd summer blast out.

Anyway the spec is as follows
350bhp ish
IHI vf34 turbo
jabbasport ceramic coated manifold
660cc fuel injectors
audi S3 fuel pump
aquamist S1 race spec
full custom 3inch pipework and FMIC(600x400x100)
piperx velocity induction kit
modified throttle body (cable)
Full custom 3inch exhaust system downpipe ceramic coated and oval tailpipe
DTA E48 ecu
vibratechnics race engine mounts
KW variant 1 coilovers
Brembo 4pot calipers and 305mm discs
Compomotive MO 5spoke wheels with toyo R888 tyres
Interior is
Polycarb windows
full cage from geronimo cages
cobra suzuka seats
6 point harness's
omp suede steering wheel
totally gutted

The car is at geronimo at the min getting the rollcage fitted so by tomorrow or tuesday i should have some more pics of a car with a cage thats half done. Here are some pics of how it looks when its all together and how it is now






As it is now getting the cage fitted

 

Nice looking project there

 

looks like dicko's old 1

 

It is

 

u got the cage yet? what do you reckon to the quality? heard some shocking reports on the mini forums and the one i saw was shocking! But they seem to have upped their game a bit recently and started turning out some good stuff.
their original cages were made from CHS tubing instead of CDS, bent with the wrong type of bender so the bends were crushed, and welded by stevie wonder!
last one i saw though was a nice fit and proper 38mm CDS and was a nice job.
i didnt know they did other cars tbh, thought they just did minis.

 

that looks like its really good fun actually.
any idea how much it weighs now ?

 

when i owned it im pretty sure it was about 930kg.

as for the cages hope there better now as wennys just put one in the mk3 cossie lol

 

thats very light. bet it goes like stink.

 

I went through and seen wennys cage and have a look at a few other cages he has done which were renault clio cup cars and they were all spot on. Bit shit that there are people unhappy with theres but i could only go by what i saw and everyone was spot on so i went for it and i'm sure i'll be happy. I am off down there today to get me seat rails welded in so i'll have a look at the progress and quality so far.

Matt were you the one saying "why do up an ibiza" if you are then i'm sure the pics above and the power to weight speaks for itself lol

 

an ibiza with that engine must fly,awesome project fella,what is it like running on the dta management

 

well impressed m8. get some lap and 1/4 times up.

 

\

 

it runs like a bag of shite when its cold but aparently its on a race map ? no cold start or iscv etc apparently ? all i know is it goes well

1/4 mile it has done 13.5 by the previous owner to dicko but dont know what tyres etc it had on then. Lap times i'll tell you next year lol

 

It was a swine to drive when cold, i hated trying to go out in it etc, as it would stall a lot until upto running temp.

Was a good little car and awesome on track

Sarah

 

you should always warm a motor up.

 

ye but they also say the best way to warm them up is to drive gently and dnt ust leave them to tick over

 

My XR2 race car used to be very lumpy sounding till it was warmed up. Used to hold it about 1600rpm, watched that the oil pressure guage didn't go off the scale, until the oil temperature settled in the mid range somewhere.

The Ibiza looks very nice though, pic of the dash is just like my Fez ST, that I've spent hours trying to get the dash out of (managed it in end!)

 

Nice motor!

 

i never knew that learn something everyday

 

should be a fun liitle car when its done it wasnt to shy when dicko had it

 

alps im pretty sure the 1/4 time was 13 dead at summet like 122mph when si had it

 

Was there a slip for it cause i'll have a look. 13 dead sounds about right now you mention it

 

Do you think it would benefit from slightly larger wheels and lower profile tyres?

 

not sure but there isnt much room in the rear arch's for bigger wheels. I think they come with 16's standard so would have thought he would have replaced them with 16's ? pretty expensive mod to make to find out that there possibly no better or worse so i think i'll leave it as is for now

 

Yes didn't mean anything stupidly big. They might be fine but if your finding you get more wear in the centre of the tyres then they're too small.

Looks like a weapon anyway!

 

any updates on the cage!

 

Alps, Who are this geronimo lot? Looked at the website, not heard of them. Also whats there work like?
As i'm after a multipoint bolt-in cage for my mk2 escort.

 

No updates on the cage as of yet, i'm out in sweden working and have dropped him an email to send me some pics but he aint got back to me as of yet.

Its a bloke in Hartlepool near wennys unit, i had never heard of them untill wenny had his cage done there. I went through and had a look at wennys cage and the work looks spot on and they are reasonabley priced so thought i'd give them a go especially with them being local and easy to get to. Just waiting on some pics and cant wait to get home and have a look at the cage and see if it is as good as what i think its going to be.

 

I may go and talk to them on Friday then.

 

That looks awesome!!

 

I can remember when Dicko n sarah had it.I seen it go round croft and it was a bloody flying machine.Good luck with getting it finished.