Gauging interest - some nice bits
Thread Starter
PassionFord Post Whore!!
iTrader: (4)
Joined: May 2004
Posts: 7,886
Likes: 35
From: Bangor, Northern Ireland
Gauging interest - some nice bits
I'm having a bit of a dilema at the moment and i'm thinking about putting the Sierra back to a lesser spec and selling it on.
To do this i'd need to sell the following parts on first. All have 4K miles use max
Front thickwall ATB diff £950
Bara box with straight cut 1st,2nd.3rd and (shorter) 5th gears £2995
SCS/Ahmed 6 degree beam, comes with polybushes and reconned shafts. £1000
Open to sensible offers on the above, but i'll ignore any silly ones - i don't NEED to sell any of it, but another car has caught my eye and i don't want to be left with a horde of bits if i sell the sierra.
I may consider taking a few more bits off the car - Genuine RS 500 inlet and intercooler etc if there is enough interest...
To do this i'd need to sell the following parts on first. All have 4K miles use max
Front thickwall ATB diff £950
Bara box with straight cut 1st,2nd.3rd and (shorter) 5th gears £2995
SCS/Ahmed 6 degree beam, comes with polybushes and reconned shafts. £1000
Open to sensible offers on the above, but i'll ignore any silly ones - i don't NEED to sell any of it, but another car has caught my eye and i don't want to be left with a horde of bits if i sell the sierra.
I may consider taking a few more bits off the car - Genuine RS 500 inlet and intercooler etc if there is enough interest...
you only got it all fitted last week lol
Advanced PassionFord User
iTrader: (13)
Joined: Jul 2005
Posts: 2,440
Likes: 46
From: Bangor, Northern Ireland
Trending Topics
Thread Starter
PassionFord Post Whore!!
iTrader: (4)
Joined: May 2004
Posts: 7,886
Likes: 35
From: Bangor, Northern Ireland
Hi mate,
The cooler won't be for sale til i get rid of the bigger parts, it could do witha lick of paint, but apart from that its fine. I'd be looking £250 ish for it.
Rought list of parts would be
Genuine RS 500 cooler - £250
Genuine RS 500 inlet complete apart from injectors - £1100
AP CP5200 4 pots and 330 mm rotors(few K use only) - £1000
Compomotive MO5's few tiny marks, no kurbing - £600 come with very good 215/40/R17 t1rs
L8 ecu with a choice of Ford baby board or Pectel - £200
4 x 803s - £90
4 x 55lb siemens (few hundred miles use) - £200
MSD single air injector (very little use) - £200
MSD chip for my engine spec incorporates LC and closed loop - £TBC
MSD wasted spark kit excluding driver - £TBC
I've loads of other fiddly bits, but i need to sort through them before i list anything.
The cooler won't be for sale til i get rid of the bigger parts, it could do witha lick of paint, but apart from that its fine. I'd be looking £250 ish for it.
Rought list of parts would be
Genuine RS 500 cooler - £250
Genuine RS 500 inlet complete apart from injectors - £1100
AP CP5200 4 pots and 330 mm rotors(few K use only) - £1000
Compomotive MO5's few tiny marks, no kurbing - £600 come with very good 215/40/R17 t1rs
L8 ecu with a choice of Ford baby board or Pectel - £200
4 x 803s - £90
4 x 55lb siemens (few hundred miles use) - £200
MSD single air injector (very little use) - £200
MSD chip for my engine spec incorporates LC and closed loop - £TBC
MSD wasted spark kit excluding driver - £TBC
I've loads of other fiddly bits, but i need to sort through them before i list anything.
Last edited by Paul_RS; Jul 6, 2009 at 09:15 PM.
Thread Starter
PassionFord Post Whore!!
iTrader: (4)
Joined: May 2004
Posts: 7,886
Likes: 35
From: Bangor, Northern Ireland
Thread
Thread Starter
Forum
Replies
Last Post