Ford RS Turbo Parts for Sale Only Escort & Fiesta RS Turbo parts for sale here please. Register for a Gold Membership to list!

RS Turbo breaking

Thread Tools
 
Search this Thread
 
Old May 12, 2009 | 09:01 AM
  #1  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default RS Turbo breaking

white with 90 spec parts, nearly everything available. Can post anything at cost or collection from the dartford area. ill update with a list later today.



engine - efi bottom end, mfi head, t285t2 cam with vernier - SOLD
chipped ecu unlimited boost + fuel ecu £100

MFi head, big port and valves, t285t2 cam - untested - £SOLD



17" TSW Evo R's in Panther Black, 4 good 205-40-17 tires £250

Koni Adjustables, need a good clean, some surface corrosion, fairly new rear springs, approx -30mm £100
fronts


pics of rears to come.....


Samco Boost hoses - £SOLD

Samco/SFS Coolant and ancillery hoses (top hose missing) £60

Compbrake Bias Valve - £SOLD




Nomad Racing 30psi white face boost gauge - £20


Lockwood white dials - £20


skirts and arches with all jacking covers - £40
rear bumper - £20
rear uncut parcel shelf - £20
Group A coil £SOLD

Red Bailey DV26 Dump Valve £SOLD


90 spec rear spoiler with screw caps £40
smoothed boot with solenoid, needs a good clean, small scab of paint chipped away top left of window £40







90 spec interior (front and rear seats and door cards), drivers seat bolster wear, needs a good clean £SOLD




scorpion exhaust 3" outward rolled exhaust, turbo back, £100
bonnet + pins, needs a respray £40

Pair white bonnet vents £20


2x metering heads - £15 each






fuel computer sender - £15


smoothed croos over pipe - £15


Clear front indicators


Front head lights - were angle eyes but the glue melted on the light rings, could be fixed or removed as used as normal



Magnecor Leads





braided brake hoses - £10
Chrome bonnet stay - £10
90 spec rear lights - £40

cossie 4 pot brake conversion
2wd cossie 4 pot callipers, machined to fit S2's, finished in blue, needs seals replacing (provided), cossie grooved discs, new pads, r&b motorsport conversion braided brake hoses - £180





Standard T3 turbo on manifold
I bought this when i was going to rebuild the car about a year ago, was told it had a rebuild but no receipt to prove, fitted to the car and only done a couple of lengths of my road moving the car about, had no play while on the car, boosted fine etc. but upon removal there is an amount of play in the shaft - im told this may just be where the seals and bearings have no oil behind them?? also no water in and outlet elbows
£SOLD






If you need any other parts give me a shout, all other parts available.

Last edited by .Tel.; Jul 12, 2009 at 06:58 PM.
Reply
Old May 12, 2009 | 09:15 AM
  #2  
darrenb16two's Avatar
darrenb16two
Too many posts.. I need a life!!
 
Joined: Nov 2008
Posts: 710
Likes: 0
From: Croydon
Default

Could you pm me a price of the front bumper if not cut out
thanks
Reply
Old May 12, 2009 | 09:31 AM
  #3  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

pm'd
Reply
Old May 12, 2009 | 10:43 AM
  #4  
Chris Latham's Avatar
Chris Latham
Parts Restoring Nutter
 
Joined: Apr 2007
Posts: 431
Likes: 1
From: UK
Default

Whats the shell like Tel?? I could be interested in shell, doors, bonnet, front bumper, trim etc. Please could you email me some pictures to - chris@passionrestorationproducts.com Many Thanks Chris

Last edited by Chris Latham; May 12, 2009 at 10:46 AM.
Reply
Old May 12, 2009 | 11:07 AM
  #5  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

not the best, front panel is rotten, needs welding on the o/s chassis rail, has a hole behind where the battery sits, needs a new scuttle. Thats about all ive seen but havent looked over it in too much detail. Can still take some pics if you want?
Reply
Old May 12, 2009 | 04:46 PM
  #6  
corsa-xe1's Avatar
corsa-xe1
Part of the Furniture
iTrader: (1)
 
Joined: May 2009
Posts: 166
Likes: 0
From: surrey
Default

hi mate do you have a t3 turbo 4 sale?

ash
Reply
Old May 12, 2009 | 05:12 PM
  #7  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

First post updated with list and prices


Originally Posted by corsa-xe1
hi mate do you have a t3 turbo 4 sale?

ash
yes mate, have a look in the first post
Reply
Old May 12, 2009 | 05:35 PM
  #8  
mark2's Avatar
mark2
PassionFord Regular
 
Joined: Jun 2004
Posts: 416
Likes: 0
Default

hi tel
do you have pics of koni's please
and is there any rust on bootlid and what colour is it( pic if possible )
cheers
mark2
Reply
Old May 12, 2009 | 05:51 PM
  #9  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

Originally Posted by mark2
hi tel
do you have pics of koni's please
and is there any rust on bootlid and what colour is it( pic if possible )
cheers
mark2
ill try and get pics tomorrow, they are still on the car though so pics wont be the best. The bootlid is white, afaik theres no rust, but ill check for you tomorrow and get some pics
Reply
Old May 12, 2009 | 08:54 PM
  #10  
tiff_lee's Avatar
tiff_lee
Wahay!! I've lost my Virginity!!
15 Year Member
 
Joined: Mar 2009
Posts: 83
Likes: 0
From: Lincs/Hants
Default

pm sent
Reply
Old May 12, 2009 | 09:27 PM
  #11  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

replied
Reply
Old May 12, 2009 | 09:31 PM
  #12  
Marts's Avatar
Marts
Too many posts.. I need a life!!
iTrader: (1)
 
Joined: Nov 2006
Posts: 930
Likes: 0
Default

What condition is the Bias Valve in mate? Wanting to fit my rear conversion real soon and this could come in handy....
Reply
Old May 12, 2009 | 11:52 PM
  #13  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

Originally Posted by Marts
What condition is the Bias Valve in mate? Wanting to fit my rear conversion real soon and this could come in handy....
i fitted it to the car when i was starting to rebuild it, since then its been used to go up and down my road a few times. ill get a pic tomorrow
Reply
Old May 13, 2009 | 05:31 PM
  #14  
DrakeyJr's Avatar
DrakeyJr
15000
 
Joined: May 2009
Posts: 17
Likes: 0
From: Benfleet, Essex
Default

hi mate, does the car have ABS, i need the master cylinder, its the 25mm bore one. cheers tim
Reply
Old May 13, 2009 | 06:11 PM
  #15  
tiddler76's Avatar
tiddler76
I'm Finding My Feet Here Now
 
Joined: Oct 2008
Posts: 103
Likes: 0
From: Telford
Default

Orange indicators and side repeaters??
Reply
Old May 13, 2009 | 06:44 PM
  #16  
tbs's Avatar
tbs
Regular Contributor
 
Joined: Sep 2008
Posts: 342
Likes: 0
From: middlesbrough
Default

hi mate have you a 90 spec spoiler if so how much delivered and what condion is it in.
Reply
Old May 13, 2009 | 07:36 PM
  #17  
Marts's Avatar
Marts
Too many posts.. I need a life!!
iTrader: (1)
 
Joined: Nov 2006
Posts: 930
Likes: 0
Default

Originally Posted by .Tel.
i fitted it to the car when i was starting to rebuild it, since then its been used to go up and down my road a few times. ill get a pic tomorrow
Cheers mate
Reply
Old May 13, 2009 | 11:49 PM
  #18  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

ive taken some pics but but my computer is being an ar*e and wont read my sd card, ill use my other one and retake the pics tomorrow

Originally Posted by tbs
hi mate have you a 90 spec spoiler if so how much delivered and what condion is it in.
yeah ive got one, it needs a good clean, has slight fracture marks in the paint around the screw caps. the spoiler itself is ok though. ill get some pics and a postage cost for you


Originally Posted by tiddler76
Orange indicators and side repeaters??
sorry mate both clear

Originally Posted by DrakeyJr
hi mate, does the car have ABS, i need the master cylinder, its the 25mm bore one. cheers tim
abs was removed and master cylinder has already gone
Reply
Old May 14, 2009 | 08:24 AM
  #19  
Marts's Avatar
Marts
Too many posts.. I need a life!!
iTrader: (1)
 
Joined: Nov 2006
Posts: 930
Likes: 0
Default

Bias Valve: Hold for me mate, please
Reply
Old May 14, 2009 | 09:08 AM
  #20  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

tiff_lee has shown interest in it first via pm, so i have to offer him first refusal. If he deoesnt have its yours if you want it
Reply
Old May 14, 2009 | 09:09 AM
  #21  
Marts's Avatar
Marts
Too many posts.. I need a life!!
iTrader: (1)
 
Joined: Nov 2006
Posts: 930
Likes: 0
Default

ok mate, well if my rears lock up and i crash... i'll blame him

Let me know
Reply
Old May 15, 2009 | 01:15 AM
  #22  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

bump

pics added to first post
Reply
Old May 15, 2009 | 07:44 AM
  #23  
Glenn_'s Avatar
Glenn_
Glennvestite
15 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Jul 2006
Posts: 62,772
Likes: 1,050
From: Darlington county durham
Default

Do you have a fuel pump cradle.Is it in good condition and how much do you want for it.
Reply
Old May 15, 2009 | 11:00 AM
  #24  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

im sure the cradle is still there, ill have a look at the condition of it
Reply
Old May 17, 2009 | 09:31 AM
  #25  
Marts's Avatar
Marts
Too many posts.. I need a life!!
iTrader: (1)
 
Joined: Nov 2006
Posts: 930
Likes: 0
Default

Originally Posted by .Tel.
tiff_lee has shown interest in it first via pm, so i have to offer him first refusal. If he deoesnt have its yours if you want it
Any more info mate?
Reply
Old May 17, 2009 | 07:19 PM
  #26  
s1 turbo stu's Avatar
s1 turbo stu
15000
 
Joined: Mar 2009
Posts: 37
Likes: 0
From: billericay
Default

ite mate have u still got the chipped ecu cheers
Reply
Old May 17, 2009 | 09:09 PM
  #27  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

Originally Posted by Marts
Any more info mate?
sorry mate sold to lee_tiff
Reply
Old May 17, 2009 | 09:10 PM
  #28  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

Originally Posted by Glenny Boy
Do you have a fuel pump cradle.Is it in good condition and how much do you want for it.
sorry mate i didnt have a chance to look at the cond this weekend, had family down, will get under the car tomorrow and have a look

Originally Posted by s1 turbo stu
ite mate have u still got the chipped ecu cheers

yes mate still got it
Reply
Old May 18, 2009 | 06:23 PM
  #29  
dan-dan's Avatar
dan-dan
Wahay!! I've lost my Virginity!!
iTrader: (1)
 
Joined: Dec 2005
Posts: 92
Likes: 0
From: Nottinghamshire
Default

Have you got a turbo return rubber oil pipe?
Reply
Old May 19, 2009 | 05:05 PM
  #30  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

Originally Posted by dabhondas2000
Have you got a turbo return rubber oil pipe?
the one that comes out of the front of the block?

ill have a look
Reply
Old May 19, 2009 | 05:14 PM
  #31  
milesy23rst's Avatar
milesy23rst
PUG 306 GTI-6
iTrader: (16)
 
Joined: Oct 2007
Posts: 3,247
Likes: 0
From: torquay devon
Default

Is the metering head in working order m8??? how much with postage???? cheers
Reply
Old May 19, 2009 | 05:38 PM
  #32  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

Originally Posted by milesy
Is the metering head in working order m8??? how much with postage???? cheers
was fine when it was on the car. £22 posted
Reply
Old May 20, 2009 | 02:08 PM
  #33  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

bump
Reply
Old May 20, 2009 | 05:24 PM
  #34  
lmmrst's Avatar
lmmrst
Wahay!! I've lost my Virginity!!
 
Joined: Jul 2006
Posts: 80
Likes: 0
From: cheltenham
Smile

Hi mate do you have the sunroof? Is it in good condition? finally would you post cheers lis
Reply
Old May 20, 2009 | 09:29 PM
  #35  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

i have mate but its completely rotten :-(
Reply
Old May 21, 2009 | 07:07 PM
  #36  
RUBY123's Avatar
RUBY123
Too many posts.. I need a life!!
15 Year Member
Liked
iTrader: (2)
 
Joined: Feb 2008
Posts: 832
Likes: 4
From: west midlands
Default

hello whats you best price on the turbo posted thanks
Reply
Old May 21, 2009 | 07:20 PM
  #37  
.Tel.'s Avatar
.Tel.
Thread Starter
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default

Originally Posted by RUBY123
hello whats you best price on the turbo posted thanks
tbh i havent got a clue what it would cost to post, but i can find out. but make me an offer
Reply
Old May 21, 2009 | 08:14 PM
  #38  
RUBY123's Avatar
RUBY123
Too many posts.. I need a life!!
15 Year Member
Liked
iTrader: (2)
 
Joined: Feb 2008
Posts: 832
Likes: 4
From: west midlands
Default

you have pm
Reply
Old May 21, 2009 | 08:22 PM
  #39  
raycov's Avatar
raycov
Regular Contributor
 
Joined: Sep 2004
Posts: 289
Likes: 0
Default

how much for the passenger side rear wheel arch trim also the side trim which runs along the sill
cheers
Reply
Old May 21, 2009 | 09:26 PM
  #40  
joe150707's Avatar
joe150707
Wahay!! I've lost my Virginity!!
iTrader: (1)
 
Joined: Jun 2007
Posts: 83
Likes: 0
From: mansfield
Default hub

hi,
how much do u want for a complete front hub delivered?it dont matter which side ?

thanks
jack
Reply



All times are GMT. The time now is 09:55 AM.