View Single Post
Old May 12, 2009 | 09:01 AM
  #1  
.Tel.'s Avatar
.Tel.
Too many posts.. I need a life!!
 
Joined: Jan 2005
Posts: 537
Likes: 0
From: In the garage
Default RS Turbo breaking

white with 90 spec parts, nearly everything available. Can post anything at cost or collection from the dartford area. ill update with a list later today.



engine - efi bottom end, mfi head, t285t2 cam with vernier - SOLD
chipped ecu unlimited boost + fuel ecu £100

MFi head, big port and valves, t285t2 cam - untested - £SOLD



17" TSW Evo R's in Panther Black, 4 good 205-40-17 tires £250

Koni Adjustables, need a good clean, some surface corrosion, fairly new rear springs, approx -30mm £100
fronts


pics of rears to come.....


Samco Boost hoses - £SOLD

Samco/SFS Coolant and ancillery hoses (top hose missing) £60

Compbrake Bias Valve - £SOLD




Nomad Racing 30psi white face boost gauge - £20


Lockwood white dials - £20


skirts and arches with all jacking covers - £40
rear bumper - £20
rear uncut parcel shelf - £20
Group A coil £SOLD

Red Bailey DV26 Dump Valve £SOLD


90 spec rear spoiler with screw caps £40
smoothed boot with solenoid, needs a good clean, small scab of paint chipped away top left of window £40







90 spec interior (front and rear seats and door cards), drivers seat bolster wear, needs a good clean £SOLD




scorpion exhaust 3" outward rolled exhaust, turbo back, £100
bonnet + pins, needs a respray £40

Pair white bonnet vents £20


2x metering heads - £15 each






fuel computer sender - £15


smoothed croos over pipe - £15


Clear front indicators


Front head lights - were angle eyes but the glue melted on the light rings, could be fixed or removed as used as normal



Magnecor Leads





braided brake hoses - £10
Chrome bonnet stay - £10
90 spec rear lights - £40

cossie 4 pot brake conversion
2wd cossie 4 pot callipers, machined to fit S2's, finished in blue, needs seals replacing (provided), cossie grooved discs, new pads, r&b motorsport conversion braided brake hoses - £180





Standard T3 turbo on manifold
I bought this when i was going to rebuild the car about a year ago, was told it had a rebuild but no receipt to prove, fitted to the car and only done a couple of lengths of my road moving the car about, had no play while on the car, boosted fine etc. but upon removal there is an amount of play in the shaft - im told this may just be where the seals and bearings have no oil behind them?? also no water in and outlet elbows
£SOLD






If you need any other parts give me a shout, all other parts available.

Last edited by .Tel.; Jul 12, 2009 at 06:58 PM.
Reply