pair of front bucket seats which are "Ektor"

same as these here, they cost £83 each new (without subframes):

http://racemodz.co.uk/shop/item.asp?itemid=1505

they are bolted down onto mondeo subframes, and will bolt straight into a mk1 or mk2 mondeo, and use the standard seatbelt. mine has passed the MOT with them fitted. or you can use harnasses instead

the drivers seat has the mondeo leccy seat motor fitted (these go for £35 on ebay) and is fully working using the switch as normal.

the drivers seat has had a repair on the RH arm, and they are in good condition

looking for £60 for the pair

collection preferred (from near cambridge in cambridgeshire), courier could be arranged

 

sold

 

How easy were they to fit to the Mondy frames.?

 

piece of piss. just rip the old cushions and covers off, and use some 4 sturdy brackets for each seat. i think that alot of bucket seats already come with the brackets?

on these the rears brackets lined up with holes in the subframe for bolting. the fronts needed holes drilling in the sub frames for the bolts.

 

Any pics of the work dude?
Sorry for bringing this back from the dead lol Just got myself an OMP TRS and have a spare Ghia Subframe...