2wd saph parts and l8 chip&greys
Thread Starter
Advanced PassionFord User
iTrader: (6)
Joined: Dec 2006
Posts: 1,755
Likes: 0
From: glasgow
right thinking about breaking a car i have
so if enough interest in the parts available i'll do it
parts wont be available for around 2 weeks
will post most parts, bigger stuff will be for collection
or will parcel for your courier
its a 2wd white saph
e reg, most parts available except engine and seats
gearbox 200
rear diff 125
rear prop 40
rear brakes(unsure of calipers but wil only sell if good) 50
rear beam inc arms&roll bar 60
front hubs 25 each
front roll bar 25
doors 20 each
front bumper 50
rear bumper 30
skirts 35
clocks 40
bootlid with spoiler 40
headlights 20
all glass available(not sure if its etched)
standard intercooler 20
rad and fans(came from 4x4 saph) 50
still all the rest of the car available inc shell
anything your looking for feel free to ask
also got new plenum spacer, 20mm 20
set of grey injectors and turbo systems chip for
l8, low comp, 403's, 3 bar etc, perfect working order, in my car just now
chip and greys 125
the plenum spacer and chip/greys are available straight away
poss deal with uprated 2wd coss parts
got loads of bits lying around so pm me if your looking for anything
so if enough interest in the parts available i'll do it
parts wont be available for around 2 weeks
will post most parts, bigger stuff will be for collection
or will parcel for your courier
its a 2wd white saph
e reg, most parts available except engine and seats
gearbox 200
rear diff 125
rear prop 40
rear brakes(unsure of calipers but wil only sell if good) 50
rear beam inc arms&roll bar 60
front hubs 25 each
front roll bar 25
doors 20 each
front bumper 50
rear bumper 30
skirts 35
clocks 40
bootlid with spoiler 40
headlights 20
all glass available(not sure if its etched)
standard intercooler 20
rad and fans(came from 4x4 saph) 50
still all the rest of the car available inc shell
anything your looking for feel free to ask
also got new plenum spacer, 20mm 20
set of grey injectors and turbo systems chip for
l8, low comp, 403's, 3 bar etc, perfect working order, in my car just now
chip and greys 125
the plenum spacer and chip/greys are available straight away
poss deal with uprated 2wd coss parts
got loads of bits lying around so pm me if your looking for anything
Last edited by westus1; Feb 15, 2009 at 11:08 PM.
Thread Starter
Advanced PassionFord User
iTrader: (6)
Joined: Dec 2006
Posts: 1,755
Likes: 0
From: glasgow
white long, with couple of lights in it
no seriously i'm sure its good mate, i'll have a good look and get back to you
i've got this just now so can stick it in the other saph before you get it to save post

no seriously i'm sure its good mate, i'll have a good look and get back to you
i've got this just now so can stick it in the other saph before you get it to save post
Thread Starter
Advanced PassionFord User
iTrader: (6)
Joined: Dec 2006
Posts: 1,755
Likes: 0
From: glasgow
james
want me to stick a couple of stamps on my garage and send you everything i've got?
your wanting my 2 saphs now all my bits
only kidding mate
i'll do you a good deal as always mate
want me to stick a couple of stamps on my garage and send you everything i've got?
your wanting my 2 saphs now all my bits

only kidding mate
i'll do you a good deal as always mate
Trending Topics
Thread Starter
Advanced PassionFord User
iTrader: (6)
Joined: Dec 2006
Posts: 1,755
Likes: 0
From: glasgow
Thread Starter
Advanced PassionFord User
iTrader: (6)
Joined: Dec 2006
Posts: 1,755
Likes: 0
From: glasgow
Thread Starter
Advanced PassionFord User
iTrader: (6)
Joined: Dec 2006
Posts: 1,755
Likes: 0
From: glasgow
not sure if thers jack point covers on it, if theres is they'll prob go with the skirts, sorry
shafts are still available, not sure what they're worth, try me with a reasonable offer,\
i'll have alook around to get a price if you like
the story behind the car is i bought the car with a rod through the block so i've never drove it
but i'm assurred by the guy i got it from that it drove fine and he just lost interest cause it had been lying around,
if realy needed i can fit the box to my own car to test before its sent out if its going a long distance
diffs defo good, wasn't on it long before it thru the rod
i havent even looked at the suspension but i'm assuming its standard as the car is pretty much standard
shafts are still available, not sure what they're worth, try me with a reasonable offer,\
i'll have alook around to get a price if you like
the story behind the car is i bought the car with a rod through the block so i've never drove it
but i'm assurred by the guy i got it from that it drove fine and he just lost interest cause it had been lying around,
if realy needed i can fit the box to my own car to test before its sent out if its going a long distance
diffs defo good, wasn't on it long before it thru the rod
i havent even looked at the suspension but i'm assuming its standard as the car is pretty much standard
Thread Starter
Advanced PassionFord User
iTrader: (6)
Joined: Dec 2006
Posts: 1,755
Likes: 0
From: glasgow
thing is jimbo i bought a good bit of gear off him and all was ok ,even got a shell off him .i bought exhaust and swedish with remote iscv of neil escos [kosse]when he was breaking it and got neil to send it to his address as they were both in scotland ,he was going to put in the shell as i was having a transport company pick it up for me.he conveintley forgot and promised me for the next six months he was sending it ,which he didnt and used every excuse in the book .



i just gave up on him to be honest,as it wasnt worth the hastle
Thread
Thread Starter
Forum
Replies
Last Post
cossiedean84
General Car Related Discussion.
37
Sep 2, 2015 10:19 PM
FlashRS
Ford RS Cosworth Parts for Sale
13
Aug 31, 2015 06:02 PM
155lee
Ford RS Cosworth Parts for Sale
0
Aug 14, 2015 11:21 AM







well if your going to keep tempting me jamie what do you expect mate
